User Stamp - Ricoh 152235 Operating Instructions Manual

Copying
Stamp position and original orientation
2
Note
❒ You cannot use the bypass tray
with this function.
❒ Only one message can be stamped
each time.
Reference
p.100 "Stamp Language"
p.100 "Stamp Position"
p.100 "Stamp Format"
A
Press [Edit/Stamp].
B
Press [Stamp].
C
Press [Preset Stamp].
62
D
Select the desired message.
E
Press [All Pages] or [1st Page only] to
select the print page.
Note
❒ You can change the position,
size, and density of the stamp.
See p.62 "Changing the stamp
position, size and density".
F
After you specify all desired set-
tings, press [OK].
G
Press [OK].
H
Place your originals, and then
press the {Start} key.
Changing the stamp position, size and
density
A
GCSTMP5E
Press [Change].
B
Select the position for print, size,
and density, and then press [OK].

User Stamp

Copies with the registered stamp.
Preparation
You have to register a user stamp
before using this function. See p.63
"To program the user stamp".
GCSTMP0E