Specifications - Emotiva Stealth PA-1 User Manual

Specifications

Circuit Topology
The Emotiva Stealth PA-1 Class-D Monoblock Power Amplifier is a fully balanced high-
performance Class D power amplifier featuring the ICEpower ASC300 amplifier module. The
ICEpower ASC300 is self-contained, and includes an audiophile-grade Class D power amplifier,
and an integral high-performance switch mode power supply.
Audio amplifier type: Fully balanced bridged high-performance Class D amplifier.
Power supply: High-performance high-efficiency switch mode power supply.
Connections
Speaker connections: Audiophile grade, insulated, gold plated, 5-way binding posts (one pair).
Audio input: Balanced input; accepts balanced XLR, balanced 1/4", and unbalanced 1/4" plugs.
Power: Standard IEC AC power receptacle; accepts all standard IEC power cables.
Controls and Indicators
Status LED: Front panel LED; Illuminates blue when the PA-1 is powered On.
AC Power Switch (rear panel rocker switch): Switches AC power to the PA-1 On and Off.
Auto/On Switch (rear panel slide switch): Configures the PA-1 to remain on continuously or to
automatically switch on when an audio signal is detected at its input.
Power
Line requirement: Between 100 VAC and 264 VAC @ 50 / 60 Hz (automatically detected).
Standby power: Approximately 0.275 watts.
Total power efficiency: Approximately 80%.
Protection
The Stealth PA-1 is protected against excessive temperature, short circuit conditions, excessive
DC offset at the output, and various input signal fault contidions. The protection circuitry in the
PA-1 is totally transparent in normal operation. If a fault is detected, the PA-1 will instantly mute
its output, and continue to monitor the situation. As soon as the fault is removed, the PA-1 will
automatically reset itself and return to normal operation.
Note: Under certain extreme fault conditions, the PA-1 may not return to normal operation
automatically. If this occurs, simply switch the AC Power switch Off and On again to reset the
protection circuitry. If your PA-1 fails to return to normal operation after doing so, please
contact Emotiva Technical Support.
Stealth PA-1
Page 13