Audio Specifications - Emotiva Stealth PA-1 User Manual

Audio Specifications

Channels: 1
Output power:
140 watts RMS into 8 Ohms at 1 kHz at 1% THD; 135 watts RMS into 8 Ohms at 0.1% THD.
300 watts RMS into 4 Ohms at 1 Khz at 1% THD; 270 watts RMS into 4 Ohms at 0.1% THD.
450 watts RMS into 2.7 Ohms at 1 kHz at 1% THD
Input impedance:
47k Ohms (balanced).
Voltage gain:
28 dB
Full power bandwidth:
20 Hz to 20 kHz.
THD+N:
0.005% at 1 kHz at 1 watt into 4 Ohms.
S/N ratio:
Referenced to 1 watt (A-weighted): 91 dB.
Referenced to full output (A-weighted): 112 dB.
Frequency response:
20 Hz to 20 kHz +/- 1 dB (worst case; 4 Ohm load).
Damping factor:
>500
Rated load:
2.5 Ohms to 8 Ohms.
Physical Dimensions and Weight
Dimensions:
8-1/2" wide x 1-7/8" high x 9" deep (unboxed; including feet; not including connectors).
8-1/2" wide x 1-3/4" high x 9" deep (unboxed; without feet).
13-5/8" long x 13" wide x 6-1/2" high (boxed)
Weight:
3 lbs. (unboxed)
6 lbs (boxed)
Ventilation
The Emotiva Stealth PA-1 requires very little ventilation and generally runs quite cool.
However, the small vents on the top and bottom of the unit should remain unblocked.
Stealth PA-1
Page 14