Specifications - Emotiva BasX A-400Z User Manual

Specifications

Circuit Topology
The BasX A-400Z is an audiophile-quality Class A/B stereo amplifier with high current output
capabilities. The A-400Z has four separate stereo speaker outputs, each controlled by a separate
relay, operated by front panel push-button switches.
Audio Power Output
Output Power:
100 watts RMS/channel; at 1 kHz; THD < 0.02% THD; into 8 Ohms.
100 watts RMS/channel; from 20 Hz - 20 kHz; THD <0.2%; into 8 Ohms.
150 watts RMS/channel; at 1 kHz; THD < 0.02% THD; into 4 Ohms.
150 watts RMS/channel; from 20 Hz - 20 kHz; THD <0.2%; into 4 Ohms.
250 watts RMS/channel; at 1 kHz; THD < 0.02% THD; into 2 Ohms.
250 watts RMS/channel; from 20 Hz - 20 kHz; THD <0.5%; into 2 Ohms.
Power Bandwidth (at rated power; 8 Ohm load):
20 Hz to 20 kHz (+ / – 0.1 dB).
Broad Band Frequency Response :
5 Hz to 80 kHz +0/-2 dB.
THD + noise:
< 0.02%; at 1 kHz; at rated power.
Signal to Noise Ratio:
> 106 dB; ref FTC rated power; unbalanced input (A-weighted).
Damping Factor (8 Ohm load):
> 500.
Input Sensitivity (for full power; Master Volume control set to maximum):
650 mV.
Gain:
32 dB.
BasX A-400Z
Page 13