Viewing And Deleting Spool Print Jobs; Managing Address Information - Ricoh Network Guide Network Manual

Viewing and Deleting Spool
Print Jobs
A A A A
Start SmartDeviceMonitor for Admin.
B B B B
On the [Group] menu, point to [Search
Device], and then click [TCP/IP],
[IPX/SPX] or [TCP/IP(SNMPv3)].
A list of machines using the select-
ed protocol appears.
Note
❒ Select the protocol of the ma-
chine whose configuration you
want to change.
❒ If you are using TCP/IP SNMP
v3, enter the user authentication.
C C C C
Select a machine.
D D D D
On the [Tools] menu, click [Spool
Printing Job List(Printer)].
A Web browser opens and the dia-
log box for entering the user name
and password for the Web Image
Monitor administrator appears.
For details about the user name
and password, consult your net-
work administrator.
E E E E
Check the Spool Printing Job List
that appears in the Web Image
Monitor.
To delete the Spool Printing Job,
select the document you want to
delete and then click [Delete].
Note
❒ To display Spool Printing Job List,
spool must be set to [Enable] on
Web Image Monitor in advance.
Reference
For details, see Help in Spool
Printing Job List area.
Using SmartDeviceMonitor for Admin
Managing Address
Information
A A A A
Start SmartDeviceMonitor for Admin.
B B B B
On the [Group] menu, point to [Search
Device], and then click [TCP/IP],
[IPX/SPX] or [TCP/IP(SNMPv3)].
A list of machines using the select-
ed protocol appears.
Note
❒ Select the protocol of the ma-
chine whose configuration you
want to change.
❒ If you are using TCP/IP SNMP
v3, enter the user authentication.
C C C C
Select a machine.
D D D D
On the [Tools] menu, click [Address
Management Tool].
The dialog box for entering the
user name and password appears.
E E E E
Enter the user name and pass-
word, and then click [OK].
Address Management Tool starts.
For details about the user name
and password, consult your net-
work administrator.
Reference
For details, see Address Manage-
ment Tool Help.
4
85