Setting Up As A Remote Printer (Netware 4.X, 5/5.1, 6/6.5) - Ricoh Network Guide Network Manual

Using a Printer Server
Setting Up as a Remote Printer
(NetWare 4.x, 5/5.1, 6/6.5)
Follow the procedure below to use
the printer as a remote printer under
NetWare 4.x, 5/5.1 and 6/6.5.
Important
❒ To use the printer as a remote
printer under NetWare 4.x, 5/5.1,
3
6/6.5, set it to NDS mode.
❒ Do not use the printer as a remote
printer when Pure IP is used.
Setting up using NIB Setup Tool
A
Log on to the file server as an ad-
m inistrator or administrator
equivalent.
B
Start NIB Setup Tool from [Start]
menu.
C
Click [Property Sheet], and then
click [OK].
D
Select a printer you want to con-
figure.
E
Click [NetWare].
F
In the [Logon Mode] area, click [File
Server Mode] or [NDS mode].
If [File Server Mode] is selected, the
network connection is established
based on the string you entered.
If [NDS mode] is selected, the net-
work connection is established
based on the string you entered.
G
In the [Print Server Name(P):] box,
enter the name of the print server.
Use the same print server name in
NWadmin. Enter up to 47 alpha-
numeric characters.
66
H
In the [File Server Name(F):] box, en-
ter the name of the file server in
which a print server is created.
You can also click [Browse...] to
browse through available file serv-
ers. Enter up to 47 alphanumeric
characters.
I
In the [NDS Tree(T):] box, enter the
NDS tree name and create the file
server.
You can also click [Browse...] to
browse through available NDS
trees and NDS contexts. Enter up
to 32 alphanumeric characters. Hy-
phens and underscores can also be
used.
J
In the [NDS Context(C):] box, enter a
context in which the print server
is created.
Enter up to 127 alphanumeric
characters.
For context, object names from
Root are entered from the lowest
object, with each object separated
by a period. For example, to create
a print server in the NETWORK
object under the organization ob-
ject DS of R oo t , en te r " N E T -
WORK.DS".
K
In the [Print Server Option Mode] ar-
ea, click [As Remote Printer(R)].
L
In the [Remote Printer No.(N)] box,
enter the printer number. Use the
same printer number created.
M
Click [OK] to close [NIB Setup Tool ].