Barnstead F46110CM Operation Manual And Parts List page 26

O
PERATION
26
3. Press the UP or DOWN button until display
reads, "dwEll."
4. Press the SCROLL button until display reads,
"dur."
5. Press the UP or DOWN button to select a time
in dwell units (seconds, minutes or hours; set
in the "dwL.U" parameter).
StEP
To climb instantaneously from the current temperature to
a specified temperature.
1. Press the PAGE button until you reach the pro-
gram list (ProG LiSt).
2. Press the SCROLL button until display reads,
tYPE."
3. Press the UP or DOWN button until the display
reads, "StEP."
4. Press the SCROLL button until display reads,
"tGt."
5. Press the UP or DOWN button to set a target
setpoint.
cALL (Running Multiple Programs)
To call a program as a subroutine:
If you want to run multiple programs, you can program the
controller to "call" or link one program to another. This
makes it possible to run one program at any time during
another program and also return to the original program if
desired.
1. Press the PAGE button until you reach the pro-
gram list (ProG LiSt).
2. Press the SCROLL button until display reads,
"tYPE."
3. Press the UP or DOWN button until display
reads, "cALL."