Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for UTC RETAIL 5170
Summary of Contents for UTC RETAIL 5170
- Page 1 5170 User Guide Thank you for selecting UTC RETAIL’s innovative Model 5170 Point of Sale solution! This guide is designed to acquaint you with the features and functionality of the 5170 Point of Sale System. © 2014 UTC RETAIL All rights reserved...
-
Page 2: 5170 Pos System User Guide
Damage to the logic module components or attached peripherals may occur if AC power is not disconnected from the product prior to attaching any accessories. CAUTION: Do not hot plug to the connector well serial ports. Turn off the 5170 POS before connecting serial port cables. 11920015 Rev A © 2014 UTC RETAIL All rights reserved... -
Page 3: Table Of Contents
Table of Contents 5170 POS System User Guide ....................2 Product Safety ........................... 2 Table of Contents ........................3 Product Information ........................4 System Components ................... 4 Operating System and Drivers ................4 Installing Customer-Specific Applications ............4 Cable Access and Routing ......................5 I/O Connections .................... -
Page 4: Product Information
0546 for assistance. Installing Customer-Specific Applications It is suggested that all applications be fully tested on the 5170 POS to ensure that there are no hardware conflicts. This is typically done prior to store installation and within a technical environment. -
Page 5: Cable Access And Routing
2. Raise the cable cover and lean it against the pole display. Or lift the cable cover from its hinge point, remove it from the system and set it aside. © 2011 UTC RETAIL. 11681063 Rev A All rights reserved. -
Page 6: I/O Connections
I/O Connections The 5170 POS I/O ports are in the Connector Well at the top, rear of the system. Raise and remove the cable cover to gain access to the Connector Well and peripheral cabling. Port Label Interface Power KEYBOARD... -
Page 7: System Power Up
PCI Expansion Options Options The 5170 POS will accept one PCIe expansion card in the logic module. Available cards include expansion card in the logic module. Available cards include expansion card in the logic module. Available cards include WLAN and RAID. -
Page 8: System Installation Guide
Note: The 5170 unit must be orientated with its rubber feet down. Do not stand the 5170 on its side. Consideration should be taken to ensure that none of the air vents are blocked; allow one inch clearance on the right and left sides.
Need help?
Do you have a question about the 5170 and is the answer not in the manual?
Questions and answers