Advertisement
Quick Links
2200 Series POS Bundle
2200 POS Bundle Installation Guide
Thank you for selecting UTC RETAIL's innovative 2200 Series Point of Sale bundle solution!
This guide is designed to help you efficiently assemble the 2200 Series POS Bundle System.
© 2008 UTC RETAIL. All rights reserved.
11692012 Rev D
Page 1 of 12
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for UTC RETAIL 2200 Series Back Office Workstation Bundle 2200
Summary of Contents for UTC RETAIL 2200 Series Back Office Workstation Bundle 2200
- Page 1 2200 Series POS Bundle 2200 POS Bundle Installation Guide Thank you for selecting UTC RETAIL’s innovative 2200 Series Point of Sale bundle solution! This guide is designed to help you efficiently assemble the 2200 Series POS Bundle System. © 2008 UTC RETAIL. All rights reserved. 11692012 Rev D Page 1 of 12...
-
Page 2: 2200 Series Pos Bundle System Installation Guide
2200 Series POS Bundle System Installation Guide This guide was prepared by UTC RETAIL to assist personnel with the installation of the bundle components. All attempts have been made to ensure that the information presented in this manual is correct. No liability, expressed or implied, will be assumed by UTC RETAIL or affiliates for damage resulting from the use of this information. -
Page 3: Table Of Contents
Table of Contents 2200 Series POS Bundle System Installation Guide ...2 Product Information ...4 Un-boxing the System...5 Installation...5 Powering On Your 2200 Series POS Bundle System ...11 Troubleshooting Procedures...12 © 2008 UTC RETAIL. All rights reserved. 11692012 Rev D Page 3 of 12... -
Page 4: Product Information
Product Information You will find the following components inside the 2200 Series POS Bundle System Box: • Safety Sheet • 2200 Series POS unit (PC / logic device) • A/C power cord for logic device • LCD Display • Cash drawer •... -
Page 5: Un-Boxing The System
Un-boxing the System Open the point of sale box and remove the contents. Remove all packing materials. Installation Orient the cash drawer on its back side on your cash wrap (counter). Remove the keys. Locate the cash drawer cable package, labeled ‘APG cash drawer 320 Multipro cable kit’. Connect the end with the larger modular plug into the jack on the base of the cash drawer. - Page 6 Connect the printer USB cable from the printer to a USB port on the rear of the PC. Connect the power cable from the printer power supply to the connector on the printer. Connect the AC cable to the printer power supply and then to a wall outlet or the optional Power Conditioner.
- Page 7 Remove the LCD, LCD VGA video cable and power supply from the LCD box. Connect the LCD VGA (Video) cable to the Video Port (Blue) on the back of the PC. Connect the power cable from the LCD power supply to the connector on the LCD Display. Connect the AC cable to the LCD power supply and then to a wall outlet or the optional Power Conditioner.
- Page 8 10. Connect the optional MSR (Magnetic Stripe Reader) to a USB Port. For instructions on the MSR bracket installation, refer to the install guide included with the MSR bracket assembly. Figure 7: Rear View of PC and Back View of LCD 11.
- Page 9 the PC. Figure 9: Rear View of PC 13. Connect the optional Inventory Scanner to a serial port on the back of the PC. Then plug the AC power adapter into a wall outlet or the optional Power Conditioner. Figure 10: Rear View of PC and Top View of Inventory Scanner ©...
- Page 10 14. Connect a site provided network cable into the network jack on the back of the PC. Figure 11: Rear View of PC 15. Plug the PC power cord into the receptacle on the rear of the PC and then into the wall outlet or optional Power Conditioner.
-
Page 11: Powering On Your 2200 Series Pos Bundle System
Powering On Your 2200 Series POS Bundle System Remove the plastic protective sheets from the LCD Monitor and the optional customer display. Turn on the ATX PC power by depressing the on/off switch located on the front left-hand side of the To activate the printer, turn on the printer rocker switch located on the front of the printer. -
Page 12: Troubleshooting Procedures
Troubleshooting Procedures The following table presents symptoms and solutions for problems potentially encountered when installing the 2200 Series Bundled POS System components. Symptom There is no image on the LCD monitor. The printer does not have power. The printer has power but the system does not boot to Windows.
Need help?
Do you have a question about the 2200 Series Back Office Workstation Bundle 2200 and is the answer not in the manual?
Questions and answers