When You Cannot Make Copies As Wanted - Ricoh Aficio IS 2325 Operating & Troubleshooting Instructions

When You Cannot Make Copies As
Wanted
This section describes causes and remedies when copy results are not as expected.
❖ Basic
Problem
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
Copy paper becomes creased. The paper is damp.
Copy paper becomes creased. The paper is too thin.
You cannot combine several
functions.
Copies are not stapled.
Causes
The number of sheets loaded
exceeds the capacity of the
machine.
The paper is damp.
The paper is too thick or too
thin.
The copy paper is wrinkled or
has been folded/creased.
Printed paper is used.
Selected functions cannot be
used together.
There are jammed staples in
the stapler.

When You Cannot Make Copies As Wanted

Solutions
Load paper only as high as the
upper limit markings on the
side fences of the paper tray or
bypass tray. See p.87 "Load-
ing Paper".
Use paper that has been
stored in the recommended
temperature and humidity
condition. See "Copy Paper",
About This Machine.
Use recommended paper. See
"Copy Paper", About This
Machine.
Use recommended paper. Use
paper that has been stored in
the recommended tempera-
ture and humidity condition.
See "Copy Paper", About This
Machine.
Use recommended paper. Do
not reuse copy paper that has
been already copied or print-
ed onto. See "Copy Paper",
About This Machine.
Use paper that has been
stored in the recommended
temperature and humidity
condition. See "Copy Paper",
About This Machine.
Use recommended paper. See
"Copy Paper", About This
Machine.
Check the combination of
functions and make the set-
tings again. See "Combination
Chart", Copy Reference.
Remove jammed staples. See
p.108 "Removing Jammed
Staples".
2
17