Energy Star Program - Ricoh Aficio IS 2416L Operating Instructions Manual

ENERGY STAR Program

®
ENERGY STAR Program
The ENERGY STAR
®
computers and other office equipment.
The program backs the development and dissemination of products that feature energy saving
functions.
It is an open program in which manufacturers participate voluntarily.
Targeted products are computers, monitors, printers, facsimiles, copiers, scanners, and multi-
function devices. Energy Star standards and logos are internationally uniform.
• Low Power mode
This product automatically lowers its power consumption 1 minute after fin-
ishing the last copy or print job. Printing is still possible in Low Power mode,
but to make copies, you have to press the operation switch first.
For details about how to change the interval between last job and Low Power
mode, see p.25 "Energy Saver Timer".
• Off mode (Copier only)
To conserve energy, this product automatically turns off 1 minute after finish-
ing the last copy or print job. In this manual, the Off mode is called the Auto
Off mode.
For details about how to change the interval between last job and Auto Off
mode, see p.25 "Auto Off Timer".
• Sleep mode (Printer, or scanner installed)
If there is a printer, or scanner unit installed, this product automatically low-
ers its power consumption even further 1 minute after finishing the last copy
or print job. Printing is still possible in Sleep mode, but to make copies, you
have to press the operation switch first.
For details about how to change the interval between last job and Sleep mode,
see p.25 "Auto Off Timer".
Note
❒ If you want to operate this product while it is in either of these modes, do
one of the following:
• Turn on the operation switch.
• Place originals in the ARDF.
• Lift the exposure glass cover or ARDF.
Program encourages energy conservation by promoting energy efficient
9