Performance Summary; Glossary Of Terms - Linear Technology DC1605B Demo Manual

DEMO MANUAL DC1605B

performance summary

Common Characteristics
PARAMETER
Supply Input Voltage Range
V1 to V6 Threshold Accuracy
V1 to V6 Monitoring Range
Table 1. Default Thresholds and GPIO Mappings
Vn_THR_LO
Default Thresholds
V1 3.2
V2 2.4V
V3 1.7V
V4 1.4V
V5 1.1V
V6 0.95V
Table 2. Default GPI Settings
MANUAL RESET
GPI1
ü
GPI2

Glossary of terms

The following list contains terms used throughout the
document.
AUXC – Auxiliary Comparator. A GPI pin may be pro-
grammed to this function and map behavior to a GPIO
pin. Nominal V = 0.5V.
TH
EEPROM – Non-volatile memory (NVM) storage used to
retain data after power is removed.
Margin – Term used typically in board level testing that
increases/decreases the output voltage to look for sensi-
tivity/marginality problems.
MARG – Ignore margining (OV and UV) when active (low).
A GPI pin may be programmed to this function and map
behavior to a GPIO pin. Nominal V
2
Specifications are valid over the full operating temperature range.
CONDITIONS
V
PWR
V = V
PWR DD33
Precision Range
Low Range
Medium Range
Vn_THR_HI GPIO1
OV
3.4 Comp_Hi
2.6V Comp_Hi
1.9V Comp_Hi
1.6V Comp_Hi
1.3V Comp_Hi
1.05V Comp_Hi
MARGIN UVDISABLE AUX COMP
ü
= 1.0V.
TH
MIN
3.4
3.2
0.2
0.5
1.0
GPIO2 GPIO3
ALERT UV
Comp_Hi Comp_Lo
Comp_Hi Comp_Lo
Comp_Hi Comp_Lo
Comp_Hi Comp_Lo
Comp_Hi Comp_Lo
Comp_Hi Comp_Lo
MR – Manual Reset, Active Low. A GPI pin may be pro-
grammed to this function and map behavior to a GPIO pin,
and optionally clear the fault history. Nominal V
NVM – Non-volatile memory, see EEPROM.
OV – Overvoltage, the result of a voltage comparison that
a pin voltage is above a programmable threshold voltage.
Rail – The final output voltage that the LTC2936 supervises.
Supervise – The act of quickly responding (compared to
a fault setting) to a voltage condition that is compared to
pre-programmed values.
UV – Undervoltage, the result of a voltage comparison that
a pin voltage is below a programmable threshold voltage.
UVDIS – UV Disable. Ignore UVs when the pin is low. A
GPI pin may be programmed to this function and map
behavior to a GPIO pin. Nominal V
TYP MAX UNITS
13.9
3.4
±1.0
1.2
3.0
5.8
CMP
Comp_Lo
Comp_Lo
Comp_Lo
Comp_Lo
Comp_Lo
Comp_Lo
= 1.0V.
TH
= 1.0V.
TH
dc1605bf
V
V
%
V
V
V