Table of Contents
Advertisement
• 6 x Screws for hanging hooks and plastic spacers
Inverted wall mounting
Inverting the panel
1. Unplug your dryer from the wall.
2. Invert the panel of the dryer by unscrewing the screws on the side of the console (A).
3. Remove the console from the dryer.
4. Unscrew six screws on the inside of the console (B).
5. Rotate the grey panel 180 ̊ (C).
6. Re-screw the six screws on the inside of the console.
7. Align the console by placing the hooks into the spaces on the dryer.
8. Ensure the wiring is firmly pressed into the clips (D).
9. Re-screw the console to the dryer.
https://producthelp.fisherpaykel.com/au/Dry/Dryers/Vented/DE6060P1/User_Guide_DE6060P1/03_Installation_instructions
Updated: Sat, 07 Jul 2018 04:48:17 GMT
Powered by
6
Advertisement
Table of Contents
