Inverted Wall Mounting Installation; Tools And Parts Required; Wall Mounting Kit Includes; Inverting The Panel - Fisher & Paykel DE7060G1 Installation Instructions Manual

Internal Venting
Front venting is the only recommended option for
venting into the room. The dryer is set up for front
venting when it leaves the factory.
Note: where possible all efforts should be made to vent
the dryer externally to avoid moisture build up around
the dryer.

Inverted Wall Mounting Installation

Your dryer has been designed to be inverted and
mounted on the wall above a washer or tub. A wall
mounting kit must be used. Inverting allows access to
the dryer control panel.

Tools and Parts Required:

• Drill and 3mm bit
• Phillips head screwdriver.

Wall Mounting Kit Includes:

• 2 x Plastic spacers
• 2 x Wall hanging brackets
• 2 x Hanging hook
• 4 x Wood screws
• 6 x Screws for hanging hooks and plastic
spacers.

Inverting the Panel

1. Unplug your dryer from the wall.
2. Invert the panel of the dryer by unscrewing the screws on the side of the console (A).
3. Remove the console from the dryer. 4 Unscrew six screws on the inside of the console (B).
https://producthelp.fisherpaykel.com/nz/Dry/Dryers/Vented/DE7060G1/User_Guide_DE7060G1/03_Installation_Instructions
Inverted wall mounting
Updated: Mon, 05 Oct 2020 18:08:12 GMT
Powered by
6