What to do if Something Goes Wrong
If you cannot Make Copies as you Want
Problem
Copies are not stapled.
3
Staples are wrongly posi-
tioned.
Misfeeds occur frequently. Copy paper size setting is
You cannot combine sever-
al functions.
Adjust Image
Problem
In Double Copies mode,
parts of the original image
are not copied.
In Center/Border mode,
parts of the original image
are not copied.
112
Cause
There are jammed staples
in the stapler.
The number of copies ex-
ceeds the capacity of the
stapler.
Originals are not set cor-
rectly.
not correct.
Selected functions cannot
be used together.
Cause
Combination of original
and copy paper is not cor-
rect.
You set the wide erased
margin.
Your original has narrow
margins on four sides.
Action
Remove jammed staples.
P.135 " e Removing
See
Jammed Staples".
Note
After removing jammed
staples, staples might
not be ejected the first
few times you try to use
the stapler.
Check the stapler capacity.
See
P.46 "Staple".
Set originals correctly. See
P.46 "Staple".
Set the proper paper size.
See
P.128 "Changing the
Paper Size".
Refer to the combination
chart. See
P.106 "Combi-
nation Chart".
Action
Select the proper original
and copy paper. See
"Originals".
Set the narrow margin with
the user tools. See "1. Erase
Border" in
P.149 "2. Ad-
1
just Image
/
". See "2. Erase
2
Center" in
P.149 "2. Ad-
1
just Image
/
".
2
P.20