To use the Rotate Stack function,
two paper trays identical in size
and different in direction (KL)
are required.
Reference
For the maximum tray capacity of
the optional finisher, see
"Staple".
A
Press the {Sorter} key until the
Stack indicator (bottom) is lit.
Sort
1-Sided
2-Sided
2
1
1
Book
2-Sided
Staple
2
Stac
2-Sided
2-Sided
2
2
Enhanced
Au o Reduce/
B
To make punch holes, press the
[Punch] key.
Limitation
The optional 3000-sheet finisher
and punch kit are required to
use this function (Type 2 only).
You cannot make punch holes
with Rotate Stack.
Note
If you do not wish to make
punch holes, go to Step D.
C
Make sure that [ON] is selected.
Then, press the [OK] key.
P.46
D
Enter the number of copies with
the number keys.
E
Set your originals.
User Tools / Counter
When setting a stack of originals
ND2L0101
in the document feeder
A Set a stack of originals in the
ND2C0101
When setting an original on the
exposure glass
A Set an original on the exposure
B Set the next originals.
document feeder, then press
the {Start} key.
After all the originals are
scanned, the copies are deliv-
ered to the tray.
Note
The last page should be on
the bottom.
glass, then press the {Start}
key.
Note
Start with the first page to be
copied.
Note
Set the original in the same
direction as the first one.
Sort/Stack/Staple
2
ND2C0104
45