FiberHome AN5116-06B Product Description
  1. Manuals
  2. Brands
  3. FiberHome Manuals
  4. Network Hardware
  5. AN5116-06B
  6. Product description

FiberHome AN5116-06B Product Description

Broadband access network optical line terminal equipment
Hide thumbs Also See for AN5116-06B:
Table of Contents

Advertisement

Quick Links

AN5116-06B
Optical Line Terminal Equipment

Product Description

Version: A/1
Code: MN000002128
FiberHome Telecommunication Technologies Co., Ltd.
November 2014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AN5116-06B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for FiberHome AN5116-06B

Summary of Contents for FiberHome AN5116-06B

  • Page 1: Product Description

    AN5116-06B Optical Line Terminal Equipment Product Description Version: A/1 Code: MN000002128 FiberHome Telecommunication Technologies Co., Ltd. November 2014...
  • Page 3 Please contact your local sales representative, service representative or distributor for any help needed at the contact information shown below. Fiberhome Telecommunication Technologies Co., Ltd. Address: No. 67, Guanggu Chuangye Jie, Wuhan, Hubei, China Zip code: 430073...

  • Page 5: Legal Notice

    Legal Notice are trademarks of FiberHome Telecommunication Technologies Co., Ltd. (Hereinafter referred to as FiberHome) All brand names and product names used in this document are used for identification purposes only and are trademarks or registered trademarks of their respective holders.

  • Page 7: Preface

    Introduces functional features, application model, network AN5116-06B Optical Line management system and technical specifications of Terminal Equipment Product AN5116-06B. It aims to acquaint users with the equipment, Description its performance and technology applied, and provide users with technical support. Introduces the appearance, structure, functions, technical...

  • Page 8: Version

    Version Description Version This manual corresponds to the AN5116-06B of Version 4. Initial version. Intended Readers This manual is intended for the following readers: Marketing personnel Commissioning engineers Operation and maintenance engineers To utilize this manual, these prerequisite skills are necessary:...

  • Page 9: Conventions

    Conventions Terminology Conventions Terminology Convention AN5116-06B Optical Line Terminal Equipment AN5116-06B FiberHome UNM2000 Network Convergence Management UNM2000 System 4×EPON-C Interface Card (Type B) EC4B 8×EPON-C Interface Card (Type B) EC8B 16*EPON Interface Card (Type B) ECOB 4×GPON-B Interface Card (Type B) GC4B 8×GPON_C Interface Card (Type B)
  • Page 10 Symbol Meaning Description Warning May cause severe bodily injuries. Jump Jumps to another step. Cascading Connects multi-level menu options. menu Bidirectional The service signal is bidirectional. service Unidirectional The service signal is unidirectional. service...

  • Page 11: Table Of Contents

    Contents Preface........................I Related Documentation ...................I Version ......................II Intended Readers ...................II Conventions ....................III Product Introduction..................1-1 Product Positioning................1-2 Functions and Features ..............1-3 1.2.1 EPON / GPON / 10G EPON Integrated Access Capability 1-3 1.2.2 Interface Type..............1-6 1.2.3 Support to IPv6 Protocol ..........1-7 1.2.4 Multicast Function............1-9 1.2.5...
  • Page 12 Product Composition..................3-1 Logical Architecture ...............3-2 Hardware Structure................3-3 3.2.1 19-inch Cabinet ...............3-3 3.2.2 21-inch Cabinet (without the Anti-dust Screen) ....3-5 3.2.3 21-inch Cabinet (with the Anti-dust Screen) ......3-8 3.2.4 PDP ................3-10 3.2.5 Subrack.................3-11 3.2.6 Card ................3-14 Software Architecture..............3-15 System Management ...................4-1 Management Mode................4-2 CLI Network Management System ..........4-3 The UNM2000 ................4-3...
  • Page 13 5.2.9 Interface Specifications of the HSWA Card.....5-13 5.2.10 Interface Specifications of the HSWD Card.....5-14 5.2.11 Interface Specifications of the TIMA Card .......5-14 Mechanical Dimensions and Weight..........5-15 Power Supply and Power Consumption........5-15 Equipment Room Requirement ............5-16 5.5.1 Power Supply Requirement..........5-16 5.5.2 Working Environment.............5-16 Standard and Protocol ..............5-16 5.6.1...
  • Page 15 Application of the AN5116-06B in the Small Cell ......2-7 Figure 2-7 Application of the AN5116-06B in High Bandwidth Access ....2-9 Figure 2-8 Application of the AN5116-06B in the Wi-Fi Hot Spot Covering ..2-11 Figure 3-1 Logical Architecture of the AN5116-06B .........3-2 Figure 3-2 Appearance of a 19-inch Cabinet ...........3-4...
  • Page 17 Tables Table 1-1 Interfaces of the AN5116 06B............1-6 Table 1-2 List of Functions and Features .............1-23 Table 3-1 Description of Subrack Structure ..........3-12 Table 3-2 Card Function List................3-14 Table 4-1 Hardware Configuration Requirement for the Server End....4-5 Table 4-2 Software Configuration Requirements for the Server End ....4-6 Table 4-3 Hardware Configuration Requirement for the Client End ....4-6 Table 4-4...
  • Page 18 Table 5-17 Specifications of Ethernet Optical Interfaces on the GU6F / GU6B / GSOF Card .................5-11 Table 5-18 Specifications of Ethernet Electrical Interfaces on the GU6F / GU6B / GSOF Card .................5-11 Table 5-19 Interface Specifications of the CE1B Card ........5-12 Table 5-20 Interface Specifications of the C155A Card........5-12 Table 5-21...

  • Page 19: Product Introduction

    Product Introduction The following introduces the applications, functions and features of the AN5116-06B. Product Positioning Functions and Features List of Functions and Features Version: A/1...

  • Page 20: Product Positioning

    AN5116-06B Optical Line Terminal Equipment Product Description Product Positioning The AN5116-06B is a new intelligent carrier-class EPON / GPON / 10G EPON integrated access product offered by FiberHome. It can provide large-capacity, high- bandwidth and low-cost voice, data and video SERVICE access solutions, so as to meet the rapid growth of network service requirements in the information age.

  • Page 21: Functions And Features

    The network positioning of the equipment is described as follows: At the network side, the AN5116-06B provides GE or 10GE uplink port(s) for connection to a BMAN (Broadband Metro Area Network) via the BRAS (Broadband Remote Access Server). It can input and output clock signals through various clock interfaces, so as to set up the transmission network for the clock synchronization information.
  • Page 22 AN5116-06B Optical Line Terminal Equipment Product Description Uplink rate: 1.25 Gbit/s Supports the DBA (Dynamic Bandwidth Allocation) algorithm. The minimum bandwidth allocation granularity of the DBA is no more than 256 kbit/s. The minimum configurable bandwidth of the DBA is no less than 512 kbit/s.
  • Page 23 1 Product Introduction GPON Access Capability Conforms to ITU-T G.984 serial standards, with good interoperability. Supports the extended OAM function. Possesses good downward compatibility. Supports various kinds of ONUs, such as SBU, SFU, MTU, cassette MDU (including LAN type and xDSL type), and shelf-based MDU.

  • Page 24: Interface Type

    The AN5116-06B supports various physical interface types, as shown in Figure 1-2. Figure 1-2 Physical Interfaces of the AN5116-06B The functions of various interfaces on the AN5116-06B are shown in Table 1-1. Table 1-1 Interfaces of the AN5116 06B Interface Type...

  • Page 25: Support To Ipv6 Protocol

    PDP. 1.2.3 Support to IPv6 Protocol The AN5116-06B supports the transparent transmission of IPv6 services, the IPv4/ v6 dual stack technology, and the network management system for the IPv6 equipment. While maintaining the current network architecture, it supports the coexistence of the IPv4 and IPv6 services to enable smooth evolution to IPv6.
  • Page 26 AN5116-06B Optical Line Terminal Equipment Product Description Supports the mapping between the classification of the uplink IPv6 service flow and the uplink IPv6 service priority, and supports the Ethernet PRI field as the priority ID. IPv6 Security Functions Supports the uplink / downlink data frame filtering based on the following objects: IPv6 source / destination address, TCP port number, UDP port number.

  • Page 27: Multicast Function

    1.2.4 Multicast Function The subscriber side and network side interfaces of the AN5116-06B support IGMP V2 / V3 and MLD V1 / V2, and can provide subscribers with flexible multicast solutions by virtue of the P2MP features of the PON.
  • Page 28 Layer 2 IGMP multicast protocol. In case that the multicast router does not support the IGMP protocol, the uplink port of the AN5116-06B will enable the PIM protocol and connect to the PIM router to set up the multicast route.

  • Page 29: Voice Function

    1 Product Introduction 1.2.5 Voice Function The AN5116-06B supports using the H.248, MGCP and SIP protocols to achieve NGN voice functions. It can meet the requirements of carrier-class speech quality, management and operations. It uses the ONU to process NGN voice signals, and uses a softswitch or IMS to perform call control, so as to provide VoIP access for analog subscriber lines.

  • Page 30: Layer 3 Routing Function

    AN5116-06B Optical Line Terminal Equipment Product Description Three party service. Alarm clock service. Call forwarding (unconditional, busy and no answer). Immediate hotline. Outgoing call blocking. Distinctive ring. 1.2.6 Layer 3 Routing Function The equipment performs flexible Layer 3 routing functions, and supports multiple routing protocols.

  • Page 31: Vlan Function

    1 Product Introduction Supporting RIP Dynamic Routing Supports RIP1 and RIP2 routing protocols. Supports external route tags: Performs flexible control of routes according to route tags in the routing policy. The messages carry the mask information, and the route aggregation and CIDR are supported.
  • Page 32 VLAN tags into network side VLAN tags. This function can reduce carriers maintenance workload and protect the distribution layer network and the core network. The VLAN translation function provided by the AN5116-06B can be in one of the following three forms: 1:1 translation:...

  • Page 33: Qos Guarantee

    1 Product Introduction The uplink data VLANs of each subscriber are translated into the corresponding network side VLANs. That is, the subscriber data VLANs correspond to network side VLANs one by one. N:1 translation: The VLAN aggregation function. In the uplink direction, a number of uplink VLANs are aggregated and translated into a unique network-side VLAN;...
  • Page 34 AN5116-06B Optical Line Terminal Equipment Product Description Supports rate control of ports. Supports bandwidth control of an EPON port, with a granularity of 32 kbit/s. The ONU only supports the single-LLID technology. QoS Capability of 10G EPON Supports the uplink port s flow-based policies, including packet filter, re- direction, flow mirroring, traffic statistics, traffic monitoring, queue scheduling, rate control, priority policing and translation.

  • Page 35: Security Mechanism

    1 Product Introduction Changes the original CoS value in the subscriber s data message, or copies the CoS value of the CVLAN to the SVLAN. Supports flow shaping, and supports dynamic adjustment of the traffic output rate. The OLT performs data buffering, and sends out the data when available bandwidth exists.
  • Page 36 Subscriber Side Security Measures Supports access security control through DHCP Option 82 and PPPOE+. The AN5116-06B can insert physical information into protocol messages of DHCP request dial or PPPOE dial. When used in combination with a verifying system, it can effectively and dynamically control subscriber access to specific network resources, so as to greatly facilitate troubleshooting and attack positioning.

  • Page 37: Reliability Design

    Reliability Design System reliability is a major concern in the system design, software design and hardware design of the AN5116-06B. The equipment provides sound redundancy protection of power supply, fans, cards and interfaces, and optical path protection switching mechanism, so as to ensure the normal operation of the equipment.
  • Page 38 AN5116-06B Optical Line Terminal Equipment Product Description If the GU6F card is used as the uplink card, the equipment can provide up to six GE uplink ports. If the HU1A card is used as the uplink card, the equipment can provide up to four GE uplink ports and one 10GE uplink port.

  • Page 39: Maintainability And Manageability

    Management and Maintenance Measures Supports local and remote management measures. Supports GUI and CLI network management systems, and performs uniform management of OLTs and ONUs via the UNM2000 developed by FiberHome. Supports in-band and out-of-band management modes. Supports SNMP. Supports the Telnet protocol for remote access to and management of the equipment.

  • Page 40: Alarm Management

    AN5116-06B Optical Line Terminal Equipment Product Description Supports pre-configuration of an ONU by the OLT. When the pre-configured ONU gets registered, the OLT will authorize the ONU and apply the pre- configured data to the ONU automatically. This makes service configuration more convenient.

  • Page 41: List Of Functions And Features

    The management system allows different levels of management authority to be defined on a per user basis using the user management setting table. List of Functions and Features See Table 1-2 for the functions supported by the AN5116-06B. Table 1-2 List of Functions and Features...
  • Page 42 AN5116-06B Optical Line Terminal Equipment Product Description Table 1-2 List of Functions and Features (Continued) Type Function Supporting single rate three color based on traffic Supporting IPv4 / IPv6 QoS PIM-SM IGMP Proxy / Snooping and MLD Proxy IGMP V1 / V2 / V3 and MLD V1 / V2 protocol...
  • Page 43 1 Product Introduction Table 1-2 List of Functions and Features (Continued) Type Function BFD (Bidirectional Forwarding Detection) Remote operation and user management Classification of operation authorities Management of equipment abnormality Version and data management Saving and query of performance statistics and historical Operations and maintenance data Remote upgrading of software...
  • Page 44 AN5116-06B Optical Line Terminal Equipment Product Description Table 1-2 List of Functions and Features (Continued) Type Function Supporting protection against DoS attacks 1-26 Version: A/1...

  • Page 45: Product Application

    Product Application The following introduces the network description, technical application, and site application of the AN5116-06B. Network Introduction Network Application Version: A/1...

  • Page 46: Network Introduction

    AN5116-06B Optical Line Terminal Equipment Product Description Network Introduction The AN5116-06B is suitable for the FTTH / FTTC / FTTB / FTTO application. Usually it is placed in a residential community or the central office. Figure 2-1 shows the network diagram of the AN5116-06B.

  • Page 47: Mstp Service Application

    Classifies different service flows by different GEM ports, maps different services to different GEM ports according to the VLAN ID, 802.1p, or physical port, and then delivers them to the AN5116-06B via the GPON line for processing. The AN5116-06B can provide subscribers simultaneously with multimedia services such as data, voice and video services, and provide QoS guarantees accordingly.

  • Page 48: Tdm Service Application

    AN5116-06B Optical Line Terminal Equipment Product Description The AN5116-06B supports the MSTP service application. The MSTP divides a Layer 2 network into multiple domains, and multiple independent spanning trees are generated in each domain, so as to eliminate the loops. In addition, the MSTP introduces the multi-instance technology.

  • Page 49: Residence And Home Application

    In the residence and home application, the AN5116-06B supports the LAN, SFU, or xDSL MDU. See Figure 2-5 for an illustration of the residence and home application.

  • Page 50: Figure 2-5 Application Of The An5116-06B In Residential Districts And

    AN5116-06B Optical Line Terminal Equipment Product Description Figure 2-5 Application of the AN5116-06B in Residential Districts and Families For the application from the central office to the cub near the home or office, it is recommended that users use the FTTC access mode. In this mode, the services can be transmitted to the home or office from the curb, so as to provide subscribers with voice, data, and video services.

  • Page 51: Small Cell Bearing Application

    Operators can use it as the platform for many customized services (such as message pushing and hot spot covering services) to form a new profit-making point. Figure 2-6 shows the bearer network of Small Cell. Figure 2-6 Application of the AN5116-06B in the Small Cell Version: A/1...

  • Page 52: High Bandwidth Access Application

    The AN5116-06B supports the BC mode of the 1588 V2 clock model. It is used together with the ONU supporting the 1588 V2 protocol to provide the clock...

  • Page 53: Figure 2-7 Application Of The An5116-06B In High Bandwidth Access

    2 Product Application Figure 2-7 Application of the AN5116-06B in High Bandwidth Access It is recommended that you use the AN5006-07 / 09 / 10, the AN5506-07 / 09 / 10, or the AN5200-07 / 10 as the ONU, which can provide 24 voice and data interfaces at most.

  • Page 54: Wi-Fi Hot Spot Covering Application

    AN5116-06B Optical Line Terminal Equipment Product Description 2.2.7 Wi-Fi Hot Spot Covering Application The equipment provides the power supply for the Wi-Fi equipment and monitoring equipment in some special circumstances via the PoE ONU, so as to solve the problem of power supply difficulties in places such as the department stores, communities and fields, where it is hard to arrange the Wi-Fi equipment.

  • Page 55: Figure 2-8 Application Of The An5116-06B In The Wi-Fi Hot Spot Covering

    2 Product Application Figure 2-8 Application of the AN5116-06B in the Wi-Fi Hot Spot Covering For different applications, the following PoE ONUs are recommended: For indoor applications, the PoE MDU AN5006-07-AK / AN5006-09-AK / AN5006-10-AK or AN5506-07-A1K / AN5506-09-A1K / AN5506-10-A1K is recommended.

  • Page 57: Product Composition

    Product Composition The following introduces the logical architecture, hardware structure, and software architecture of the AN5116-06B. Logical Architecture Hardware Structure Software Architecture Version: A/1...

  • Page 58: Logical Architecture

    The HU4A card can be used only when the equipment is configured with the HSWD card. The left side of the figure shows the network side of the AN5116-06B. On this side, the uplink cards or TDM interface cards transmit service signals to various transmission networks.

  • Page 59: Hardware Structure

    3 Product Composition The right side of the figure shows the subscriber side of the AN5116-06B. On this side, the EPON / GPON / 10G EPON interface cards connect with the ONUs via the ODN; and the Ethernet interface cards connect with the subscriber or other Ethernet equipment sets via the cascade interfaces.

  • Page 60: Figure 3-2 Appearance Of A 19-Inch Cabinet

    AN5116-06B Optical Line Terminal Equipment Product Description Figure 3-2 Appearance of a 19-inch Cabinet 3.2.1.2 Dimension The dimensions of a 19-inch cabinet are described as follows in terms of Height (H) × Width (W) × Depth (D): 1600mm×600mm×600mm 2000mm×600mm×600mm 2200mm×600mm×600mm 2600mm×600mm×600mm...

  • Page 61: 21-Inch Cabinet (Without The Anti-Dust Screen)

    3.2.2 21-inch Cabinet (without the Anti-dust Screen) The following introduces the 21-inch cabinet (without the anti-dust screen) used by the AN5116-06B. Version: A/1...

  • Page 62: Figure 3-4 Appearance Of A 21-Inch Cabinet (Without The Anti-Dust Screen)

    AN5116-06B Optical Line Terminal Equipment Product Description 3.2.2.1 Appearance The appearance of a 21-inch cabinet (without the anti-dust screen) is shown in Figure 3-4. Figure 3-4 Appearance of a 21-inch Cabinet (without the Anti-dust Screen) 3.2.2.2 Dimensions The dimensions of 19-inch cabinets are described as follows in terms of Height (H) ×...

  • Page 63: Figure 3-5 Typical Layout Of A 21-Inch Cabinet (Without The Anti-Dust Screen)

    3 Product Composition 3.2.2.3 Equipment Layout According to their heights, the 21-inch cabinets (without the anti-dust screen) can be classified into four types: 2600mm cabinet, 2200mm cabinet, 2000mm cabinet, and 1600mm cabinet. The corresponding typical configurations of these cabinets are shown in Figure 3-5 (unit: mm).

  • Page 64: 21-Inch Cabinet (With The Anti-Dust Screen)

    21-inch Cabinet (with the Anti-dust Screen) The following introduces the 21-inch cabinet (with the anti-dust screen) used by the AN5116-06B. The anti-dust screen has been installed at the air inlets of the cabinet (such as the front door and top) before delivery.

  • Page 65: Figure 3-7 Typical Layout Of A 21-Inch Cabinet (With The Anti-Dust Screen)

    3 Product Composition 3.2.3.2 Dimension The dimensions of a 21-inch cabinet (with the anti-dust screen) are described as follows in terms of Height (H) × Width (W) × Depth (D): 1600mm×600mm×300mm 2000mm×600mm×300mm 2200mm×600mm×300mm 2600mm×600mm×300mm 3.2.3.3 Equipment Layout According to their heights, the 21-inch cabinets (with the anti-dust screen) can be classified into four types: 2600mm cabinet, 2200mm cabinet, 2000mm cabinet, and 1600mm cabinet.

  • Page 66: Pdp

    3.2.4 The AN5116-06B uses the PDP of the following types for the corresponding cabinets to provide eight branches of power supply (four active and four standby) for the equipment.

  • Page 67: Subrack

    3.2.5.1 Appearance The backplane of the AN5116-06B is located in the rear of the subrack. All cards of the equipment are plugged from the front of the subrack and the front wiring mode is used. Figure 3-9 shows the structure and components of the subrack.
  • Page 68 Facilitates air cooling for the equipment. Fan unit Connects each module and performs the function of Backplane bus. 3.2.5.2 Slot Allocation and Typical Configuration See Figure 3-10 for the slot allocation and typical configuration of the AN5116-06B subrack. 3-12 Version: A/1...

  • Page 69: Figure 3-10 Subrack Slot Allocation And Typical Configuration

    Figure 3-10 Subrack Slot Allocation and Typical Configuration The AN5116-06B subrack has a total of 20 vertical slots. Slots 1 to 8 and 11 to 18 are for various service cards such as EPON interface cards, 10G EPON interface cards, GPON interface cards, TDM interface cards, and Ethernet interface cards.

  • Page 70: Card

    AN5116-06B Optical Line Terminal Equipment Product Description 3.2.6 Card The AN5116-06B card functions are shown in Table 3-2 . Table 3-2 Card Function List Card Type Card Name Function Description Uplinks the signals in the EPON / GPON system; provides four GE uplink optical / electrical interfaces HU1A and one 10GE uplink optical interface.

  • Page 71: Software Architecture

    Supports large capacity data exchange. Provides a Console interface for local management. Software Architecture The AN5116-06B s software module is composed of the core switch software, the service interface card software, the uplink card software, and the network management software. See Figure 3-11.

  • Page 72: Figure 3-11 Software Architecture Of The An5116-06B System

    AN5116-06B Optical Line Terminal Equipment Product Description The core switch software resides on the core switch card. It manages and maintains the AN5116-06B, and provides the management and maintenance interface for the network management system. It is the core of the software system.

  • Page 73: System Management

    System Management The following introduces the system management mode of the AN5116-06B. Management Mode CLI Network Management System The UNM2000 Version: A/1...

  • Page 74: Management Mode

    AN5116-06B Optical Line Terminal Equipment Product Description Management Mode The AN5116-06B supports various management modes for equipment maintenance and monitoring, and includes the following modes: According to whether the network management system is connected with the equipment network interface, the management modes can be classified as follows.

  • Page 75: Cli Network Management System

    Operators can log in the CLI management system for the in one of the two ways as mentioned below: Log in the AN5116-06B system via the Console interface using a hyper terminal. Log in the AN5116-06B system via the uplink interface or the out-of-band network port in the Telnet mode.

  • Page 76: Function

    AN5116-06B Optical Line Terminal Equipment Product Description As a new generation of network management system, the UNM2000 aims to provide users with customer-centered experience. As an independent application program, the UNM2000 can be installed in various operating systems based on different databases. That is, it is compatible with multiple operating systems.

  • Page 77: Operating Environment

    4 System Management Event Management Events occur during the normal operation of the system, and they act as active notices to users. The UNM2000 divides the events into four levels based on the order of severity: urgent, major, minor and prompt. Performance Management The UNM2000 supports viewing the real-time performance data and comprehensive management performance data.
  • Page 78 AN5116-06B Optical Line Terminal Equipment Product Description Table 4-1 Hardware Configuration Requirement for the Server End (Continued) CPU Quantity Memory Size Hard Disk Space Network Scale CPU Clock Rate Equivalent to 100 to Intel XeonE5- 500 OLTs, with fully- 2667V2 (8-core), 3.

  • Page 79: Network Mode

    4 System Management Table 4-3 Hardware Configuration Requirement for the Client End (Continued) CPU Quantity Memory Size Hard Disk Space Network Scale CPU Clock Rate Equivalent to 100 to Intel i3-4130 (dual- 500 OLTs, with fully- 1*500GB core) 3.4GHz configured ONUs under them.

  • Page 80: Figure 4-2 Network Example

    AN5116-06B Optical Line Terminal Equipment Product Description Advantage: The management data channel is independent from the service data channel, and the management is not restricted by the state of the service data channel. Compared with the in-band mode, the out-of-band network mode can provide a more reliable equipment management channel.

  • Page 81: Technical Specification And Standard

    Technical Specification and Standard The following introduces the equipment s technical specifications and applicable standards. Performance Parameter Interface Specifications Mechanical Dimensions and Weight Power Supply and Power Consumption Equipment Room Requirement Standard and Protocol Version: A/1...

  • Page 82: Performance Parameter

    AN5116-06B Optical Line Terminal Equipment Product Description Performance Parameter The following introduces related performance parameters of the AN5116-06B. 5.1.1 Overall Performance Table 5-1 The Overall Performance of the Equipment Specification Item 408Gbit/s (equipped with the HSWA card) Core switch card capacity...
  • Page 83 5 Technical Specification and Standard Table 5-3 The Ethernet Service Performance of the Equipment (Continued) Specification Item When the 10G / 1G-EPON interface only accesses the 10G / 1G- EPON ONU, the downlink throughput is 8.3 Gbit/s, and the uplink throughput is 900 Mbit/s. 10G EPON system When the 10G / 10G-EPON interface only accesses the 10G /...
  • Page 84 AN5116-06B Optical Line Terminal Equipment Product Description Table 5-4 The Voice Service Performance of the Equipment Specification Item Voice encoding dynamic 60ms switching period Voice interruption and jitter occurrence Under very good network condition: PSQM average value < 1.5 Under bad network condition (packet loss rate = 1%, jitter = 20 ms, Objective evaluation of delay = 100 ms): PSQM average value <...

  • Page 85: Access Capability

    5 Technical Specification and Standard Table 5-5 The TDM Service Performance of the Equipment (Continued) Specification Item Transmitting optical The range of mean launched optical power of STM-1 optical power interface: -8 to -15 dBm. Input interface receiving The input interface receiving sensitivity of STM-1 optical interface sensitivity is lower than or equal to -31dBm.

  • Page 86: Reliability Specifications

    AN5116-06B Optical Line Terminal Equipment Product Description 5.1.3 Reliability Specifications See Table 5-7 for the card reliability specifications; see Table 5-8 for the equipment reliability specifications. Table 5-7 The Card Reliability Specifications MTBF (hour) MTBF (year) Failure Rate (ppm) Card HSWA 148037.24...

  • Page 87: Interface Specifications

    5 Technical Specification and Standard Interface Specifications The following introduces the specifications of the interfaces on the equipment. 5.2.1 Specifications of Interfaces on the EC4B / EC8B / ECOB Card Table 5-9 Specifications of Interfaces on the EC4B / EC8B / ECOB Card Item 1.25Gbit/s EPON Interface Interface type...

  • Page 88: Interface Specifications Of The Gc4B / Gc8B / Gcob Card

    AN5116-06B Optical Line Terminal Equipment Product Description Table 5-10 Specifications of Interface on the XG8A Card (Continued) 1.25 Gbit/s 10G EPON 10 Gbit/s 10G EPON Item Interface Interface Average launched power of OFF -42 dBm -42 dBm transmitter Extinction ratio...

  • Page 89: Interface Specifications Of The Hu1A / Hu1B / Hu2A Card

    5 Technical Specification and Standard Table 5-12 Interfaces Specifications of the GC4B / GC8B / GCOB Card (Class C+) Specification Item Interface type SC/PC Signal nominal rate 2.5 Gbit/s ± 100 ppm Wavelength range 1480 nm to 1500 nm Mean launched power (maximum) +7 dBm Transmit- Mean launched power (minimum)

  • Page 90: Interface Specifications Of The Hu4A Card

    AN5116-06B Optical Line Terminal Equipment Product Description Table 5-14 Specifications of GE Optical Interfaces on the the HU1A / HU1B / HU2A Card Item 1000Base-SX 1000Base-LX Interface Type LC/PC LC/PC Interface rate 1000 Mbit/s 1000 Mbit/s Applicable standard IEEE 802.3z IEEE 802.3z...

  • Page 91: Interface Specifications Of The Gu6F / Gu6B / Gsof Card

    5 Technical Specification and Standard Table 5-16 Ethernet Optical Interface Specifications of the HU4A Card (Continued) Item 10000Base-SR Minimum transmitting optical power -6 dBm Minimum overload optical power Maximum receiving sensitivity -11 dBm Minimum extinction ratio 3 dB 5.2.6 Interface Specifications of the GU6F / GU6B / GSOF Card Table 5-17 Specifications of Ethernet Optical Interfaces on the GU6F / GU6B / GSOF Card...

  • Page 92: Interface Specifications Of The Ce1B Card

    AN5116-06B Optical Line Terminal Equipment Product Description 5.2.7 Interface Specifications of the CE1B Card Table 5-19 Interface Specifications of the CE1B Card Specification Item All marks of effective signals comply with pulse mask in Figure 5- Pulse shape Nominal frequency 2048 kbit/s ±...

  • Page 93: Interface Specifications Of The Hswa Card

    5 Technical Specification and Standard Table 5-20 Interface Specifications of the C155A Card (Continued) Specification Item Minimum mean launched -15 dBm -5 dBm -5 dBm power Minimum extinction ratio 8.2 dB 10 dB 10 dB Attenuation range 0 to 12 dB 10 dB to 28 dB 10 dB to 28 dB Maximum dispersion...

  • Page 94: Interface Specifications Of The Hswd Card

    AN5116-06B Optical Line Terminal Equipment Product Description 5.2.10 Interface Specifications of the HSWD Card Table 5-22 Interface Specifications of the HSWD Card Item Specification Interface Type RJ-45 Asynchronous EIA / TIA-232 Interface standard Rate 9600 bit/s 5.2.11 Interface Specifications of the TIMA Card...

  • Page 95: Mechanical Dimensions And Weight

    Subrack (fully configured) 30kg 471.65mm × 480.8mm × 262.7mm Power Supply and Power Consumption See Table 5-26 for the power consumption of the AN5116-06B's cards under the -48V DC power supply. Table 5-26 Power Consumption of the Equipment's Cards Power...

  • Page 96: Equipment Room Requirement

    AN5116-06B Optical Line Terminal Equipment Product Description Equipment Room Requirement The following introduces the requirements on the equipment room for the AN5116- 06B. 5.5.1 Power Supply Requirement Equipment room voltage: -48 V DC (-40 V to -57 V). The equipment room should be equipped with the UPS power supply that can run at least 8 hours continuously.

  • Page 97: Environment Standard

    5 Technical Specification and Standard 5.6.1 Environment Standard Standard Number Name Tests for Flammability of Plastic Materials for Parts in Devices and ANSI/UL 94-2006 Appliances (Proposal dated March 17, 2006) Information technology equipment - Safety - General BS EN 60950-1-2006 requirements Information technology equipment - Safety - Equipment installed BS EN 60950-22-2006...

  • Page 98: Electromagnetic Compatibility Standard

    AN5116-06B Optical Line Terminal Equipment Product Description Standard Number Name Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 1: Climatic, mechanical tests and IEC 61587-1-2007 safety aspects for cabinets, racks, subracks and chassis...

  • Page 99: Safety Standard

    5 Technical Specification and Standard Standard Number Name Power supply interface at the input telecommunications ETSI EN 300132-2 equipment; Part 2: Operated by direct current (DC) Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; Electromagnetic ETSI EN 300386 V 1.4.1 Compatibility (EMC) requirements Electromagnetic compatibility (EMC) - Part 4 - 2:Testing and IEC 61000-4-2...

  • Page 100: 10G Epon Standard

    AN5116-06B Optical Line Terminal Equipment Product Description Standard Number Name Information technology equipment -Safety - Part 1: General EN 60950-1 Requirements Safety of laser products - Part 1: Equipment classification and IEC 60825-1 requirements Safety of laser products - Part 2: Safety of optical fibre...

  • Page 101: Gpon Standard

    5 Technical Specification and Standard 5.6.6 GPON Standard Standard Number Name Gigabit-capable passive optical networks (GPON): General ITU-T G.984.1 characteristics Gigabit-capable Passive Optical Networks (GPON): Physical ITU-T G.984.2 Media Dependent (PMD) layer specification Gigabit-capable Passive Optical Networks (G-PON): Transmission ITU-T G.984.3 convergence layer specification ITU-T G.Imp984.3 Implementers Guide for ITU-T Rec.

  • Page 102: Routing Protocol

    AN5116-06B Optical Line Terminal Equipment Product Description Standard Number Name IEEE Standard for Information technology- Telecommunications and information exchange between systems- Local and metropolitan area networks- Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) IEEE 802.3ah...

  • Page 103: Ims Protocol

    5 Technical Specification and Standard 5.6.10 IMS Protocol Standard Number Name IP Multimedia Subsystem (IMS) 3GPP TS 23.228 Signaling flows for the IP multimedia call control based on SIP 3GPPTS24.228 and SDP 3GPP TS 24.229 IP Multimedia Call Control Protocol based on SIP and SDP RFC3261 SIP: Session Initiation Protocol 5.6.11...

  • Page 104: Other Standard And Protocol

    AN5116-06B Optical Line Terminal Equipment Product Description 5.6.13 Other Standard and Protocol Standard Number Name PPP Extensible Authentication Protocol (EAP) IETF RFC 2284 Specification for Diagnostic Monitoring Interface for Optical SFF-8472 Transceivers (Rev 10.3 Dec.1, 2007) 5-24 Version: A/1...

  • Page 105: Appendix A Abbreviations

    Appendix A Abbreviations Access Control List Address Resolution Protocol Average Revenue Per User ARPU BRAS Broadband Remote Access Server Base Station Controller CATV Cable Antenna Television Call Detail Record Command Line Interface Class of Service Dynamic Bandwidth Allocation Dynamic Host Configuration Protocol DHCP Digital Subscriber Line Digital Subscriber Line Access Multiplexer...
  • Page 106 AN5116-06B Optical Line Terminal Equipment Product Description Media Gateway Controller Media Gateway Control Protocol MGCP MoIP Modem over IP MTBF Mean Time Between Failure Next Generation Network Operation, Administration And Maintenance Optical Distribution Network Optical Line Termination Optical Network Unit...
  • Page 107 Appendix A Abbreviations Video Distribution Network VLAN Virtual Local Area Network VoIP Voice over Internet Protocol Weighted Round Robin Version: A/1...
  • Page 109 Product Documentation Customer Satisfaction Survery Thank you for reading and using the product documentation provided by FiberHome. Please take a moment to complete this survey. Your answers will help us to improve the documentation and better suit your needs. Your responses will be confidential and given serious consideration.
  • Page 110 12. Additional comments about our documentation or suggestions on how we can improve: Thank you for your assistance. Please fax or send the completed survey to us at the contact information included in the documentation. If you have any questions or concerns about this survey please email at edit@fiberhome.com...

Table of Contents