Required Settings In The Simatic Manager - Siemens SIMATIC PCS 7 Configuration Manual

Creating and managing a PCS 7 project

5.2 Required settings in the SIMATIC Manager

5.2 Required settings in the SIMATIC Manager
Introduction
Before creating a multiproject, you should check the default settings of the SIMATIC Manager
and adapt them to your requirements. The defaults settings can be edited in the SIMATIC
Manager under "Options > Settings...".
The online help is available in every dialog to provide you with an exact description of the
optional settings. Practical settings which can make configuration work easier are listed below.
General
Set the storage location for projects to a directory in a data partition.
If you use another project path, you need to set the necessary access rights using the
"SimaticRights.exe" application. You will find the application "SimaticRights.exe" on the DVD
2 "Process Control System SIMATIC PCS 7" under "Additional_Products\SimaticRights
\SimaticRights.exe".
Language
Once the country language has been set you can determine whether the I/O address concept
for the multiproject to be created should be based on German (e.g. AW512) or English (e.g.
QW512).
46
Compendium Part A - Configuration Guidelines (V8.2)
Configuration Manual, 08/2016, A5E38166869-AA