Openpcs 7 - Siemens SIMATIC PCS 7 Configuration Manual

Configuring OS functions

10.7 OpenPCS 7

10.7 OpenPCS 7
Introduction
Data from PCS 7 is also available to higher-level systems with Open PCS 7 (e.g. plant
management level). The following standard interfaces can be used to exchange data from
OpenPCS 7 stations:
● OPC UA (Unified Architecture)
● OPC DA (Data Access)
● OPC HDA (Historical Data Access)
● OPC A&E (Alarm & Events)
● OPC "H" A&E (Historical Alarm & Events)
● OLE/DB for OLE-enabled applications (e.g. MS Office products) and for accessing historical
values, alarms and messages via standardized database access.
Note
System description
You will find a detailed description of how to use the Web solution in the "SIMATIC Process
Control System PCS 7 OpenPCS 7"
109485957) manual.
270
(https://support.industry.siemens.com/cs/ww/en/view/
Compendium Part A - Configuration Guidelines (V8.2)
Configuration Manual, 08/2016, A5E38166869-AA