Creating and managing a PCS 7 project
5.5 Adding Additional Stations
5.5.2
Automation system - Standard
Procedure
The following steps show how to insert a standard automation system (AS) into the project:
1. Insert a standard AS into the subproject "02_Plant_B" by selecting the subproject and
selecting the "Insert New Object > Preconfigured Station" command via the context menu.
The PCS 7 wizard for inserting new objects runs.
2. Using the PCS 7 wizard select your standard AS in accordance with the article number and
terminate the wizard without selecting any corresponding OS objects.
Information on running the PCS 7 wizard can be found in the section "Creating the
multiproject (Page 48)".
62
Compendium Part A - Configuration Guidelines (V8.2)
Configuration Manual, 08/2016, A5E38166869-AA