Changing The Message Class, Priority And Message Text - Siemens SIMATIC PCS 7 Configuration Manual

Configuring AS functions
8.1 Principles
8.1.4

Changing the message class, priority and message text

Introduction
You can change the message class, priority, and message text for all function blocks.
Note
Please take note of the "Aspects of Message Configuration" table in this regard in the "SIMATIC
Process Control System PCS 7 Engineering System"
cs/ww/en/view/109485969) manual.
The appearance of limit violations at the block can be influenced in process control in group
displays and in message lists. The "User-configurable message classes" function is available
for this purpose.
You can find additional information on the topic of "User-configurable message classes" in the
manual "SIMATIC Process Control System PCS 7 Engineering System"
support.industry.siemens.com/cs/ww/en/view/109485969).
156
(https://support.industry.siemens.com/
(https://
Compendium Part A - Configuration Guidelines (V8.2)
Configuration Manual, 08/2016, A5E38166869-AA