10.2.2
Design of process pictures
Introduction
In general, process pictures are created in accordance with a set of specifications which are
drawn up in close collaboration with the customer. Sector- and company-specific standards
and guidelines must be taken into account.
In the sample project, the following definitions have been laid down:
Function design
This function is provided for user objects. Use faceplates from
the OS library.
Cable design
Color
Width
Boiler design
Represent boilers in graphics by means of black lines on a gray background. The boiler shape
is defined by the RI flowchart.
Use static text to indicate the volume of the boilers. The fill quantity is shown by means of a
bar on the boiler.
Picture navigation – Start and end of a cable
Interrupted cables are identified by an arrow at the end of the cable.
Example of a process picture for a chemical plant:
Compendium Part A - Configuration Guidelines (V8.2)
Configuration Manual, 08/2016, A5E38166869-AA
Black:
Product
Yellow:
Gas, N2
Dark red:
Steam, heating system
Green:
Water
Blue:
Air
Wide:
Main product cables (line width 4)
Narrow:
Other cables (line width 2)
Configuring OS functions
10.2 Visualization interface
227