Bluetooth Mode Pairing And Programming; Operating Your Radio - Cobra MR HH 500 FLT BT EU Owner's Manual

®
luetooth Mode Pairing
and Programming
VHF Marine Radio Protocols

Operating Your Radio

luetooth ® Mode Pairing and Programming
Bluetooth ® wireless technology is a standard which has been developed for use in
mobile (cell) phones and other devices. This radio can be wirelessly linked to your
mobile phone if your mobile phone also has Bluetooth. This process of linking your
mobile phone and this radio requires a one-time "pairing" after which the two devices
can be "connected" when they are within range. When connected, this radio can act
as the speaker and microphone of your mobile phone while your phone is stowed in a
safe and dry location.
This programming section shows you how to complete the pairing process. It also shows
you how to change some settings related to the Bluetooth functionality of your radio.
Pairing Your Mobile Phone:
luetooth Button
1. Press and release the Bluetooth button to enter
M
BLUETOOTH Standby. The matrix will display BLUETOOTH
STANDBY and the blue keypad backlight will come On.
2. Press and hold the Bluetooth button for four (4) seconds
[until the radio beeps four (4) times] from the Bluetooth
Standby mode. The blue backlight will light. Your radio is
C
now in a "Pairing Mode" and can be "found" by your phone.
EN
While in pairing mode, the LCD will display PAIRING as
shown in the illustration below.
luetooth Standby Mode,
3. Follow the mobile phone's instructions to search for
Unpaired State
available pairing with another Bluetooth device. This can
GMRS
VHF
often be found in the Tools or Settings menu of your mobile
R
X
T phone.
A
Enter the "P.I.N." (Personal Identification Number 0000), on
B
U C I
your mobile phone if prompted. Wait for the pairing
ATIS VOX LOMEDHI SAME SAME MEM MEM
process to complete.
luetooth Pairing Mode
GMRS
VHF
R
X
T
A
B
U C I
ATIS VOX LOMEDHI SAME MEM MEM
22 English
®
luetooth Mode Pairing
and Programming
Operating Your Radio VHF Marine Radio Protocols
4. You will then see a confirmation of successful pairing
luetooth Pairing
or a notice to try again if pairing did not occur. The
GMRS
VHF
matrix will display BLUETOOTH CONNECTED once the
R
X
T process is completed.
A
B NOTE
U C I
ATIS VOX LOMEDHI SAME MEM MEM
This process only needs to be completed for first
time operation. From then on, as long as your mobile
phone is within 30 feet (10 meters) of the radio, the two
luetooth Pairing and
units will "Connect" automatically.
Connection Complete
GMRS
VHF
R
X
T
A
B
U C I
ATIS VOX LOMEDHI SAME MEM MEM
Bluetooth Mode Programming
The default settings for how your radio answers and conducts Bluetooth mobile phone
calls can be adjusted.
VOX On or Off
VOX
The VOX function converts the radio microphone's pickup of
GMRS
VHF
your voice from being controlled by the PTT button to being
R
X
T activated by your voice. When VOX is On, the PTT button does
A
not need to be pressed to transmit your voice, and you can
B
U C I just speak into the microphone.
ATIS VOX LOMEDHI SAME MEM MEM
When VOX is Off, you need to press the PTT button while
speaking.
To Change Between VOX On and Off:
1. From the Bluetooth Standby mode, press and hold
Call/Enter/Setup button to access the Setup menu.
VOX On/Off will be the first menu item to appear. The
display will show BT VOX, the Vox icon and ON or OFF
flashing.
2. Press the Channel UP/Down button to select ON or OFF.
3. Press the Call/Enter/Setup button to confirm
your selection and move to the next Setup
mode programming.
•
Nothing Comes Close to a Cobra ® 23