Operation; Using Vox Mode - Cobra microTALK FRS 307-2 VP Operating Instructions Manual

O P E R AT I O N • A D VA N C E D F E AT U R E S

Using VOX Mode

In VOX mode, your microTALK ® can be used
"hands-free," automatically transmitting when
you speak. To turn VOX mode on and off:
1. Press the MODE button until the VOX icon
flashes and the current setting ("on" or
"off") is displayed.
M O D E
b u t t o n
2. Push the CHANNEL SELECT button up or
down to turn VOX mode on or off.
C H A N N E L
C H A N N E L
D O W N
U P
3. Press and release the LOCK button to enter
the new setting, or press the MODE button
to enter the new setting and proceed to
other functions.
LOCK MODE
b u t t o n b u t t o n
7
ENGLISH
Setting the VOX
Sensitivity Level
You can set the VOX sensitivity level to fit the
volume of your voice and avoid transmissions
triggered by background noise. To set the
sensitivity:
1. Press the MODE button until the VOX
icon flashes and the number for the
current sensitivity level is displayed next
to the letter L (level 5 = most sensitive,
level 1 = least sensitive).
M O D E
b u t t o n
2. Push the CHANNEL SELECT button up or
down to change the setting.
C H A N N E L
C H A N N E L
D O W N
U P
3. Press and release the LOCK button to enter
the new setting, or press the MODE button
to enter the new setting and proceed to
other functions.
ENGLISH
Programming Memory
Locations
Your microTALK ® radio has 10 memory
locations (0-9) for storing your most
frequently used channels and privacy codes.
To program locations:
1. Push the MODE
button until the
M O D E
Memory icon and
b u t t o n
the memory
location flashes.
2. Select the memory
CHANNEL SELECT
l o cation you wish to
b u t t o n
change by pushing
the CHANNEL SELECT
button up or down.
3. Press and release the MODE button again.
The Memory icon and the main channel
number will flash.
MODE button
4. Select the main channel you wish to s t o re by
pushing the CHANNEL SELECT button up or
d o w n .
O P E R AT I O N
5. P ress the MODE button again to store the
mai n channel in memory and move to
privacy code selection. The privacy code
number begins flashing and the Memor y
icon continues to flash.
MODE button
6. Select the privacy code (0-38) you
wish to store by pushing the CHANNEL
SELECT button up or down.
7. Press the TALK button
TALK
to transmit on your b u t t o n
selected channel and
privacy code, which
will be stored into
the memory location you are using.
8. Press and release the LOCK button to
return to Standby mode at your new
memory location, or press and release the
MODE button to save the memory location
and proceed to other functions.
L O C K MODE
b u t t o n b u t t o n
8