Advanced Operation; Operating Your Radio - Cobra MR HH 500 FLT BT EU Owner's Manual

Advanced Operation

VHF Marine Radio Protocols

Operating Your Radio

Advanced Operation
Channel 16 Button
Channel 16 Mode
ALL
Channel 16 mode gives you quick access to calling on
SETUP Channel 16.
16
To Switch to Channel 16:
EM 1. Press the Channel 16 button to change to
SC Channel 16.
2. Press the Channel 16 button a second time and
return to the last used channel.
Channel 16
R
X
T
A
B
U I C
ATIS VOX LOMEDHI SAM
28 English
Advanced Operation
Operating Your Radio VHF Marine Radio Protocols
Tri-Watch Mode
TRI-WATCH Button
•
CALL
Tri-Watch mode gives you one (1) button access to scan
ENT SET
a total of three (3) channels of most importance to you.
TW
Channel 16 is preprogrammed and will always be one (1)
of the scanned locations. Two (2) other channels of your
MEM
choice can be stored in the radio. These channels can be
ESC
edited and/or recalled during future engagements of
Tri-Watch mode.
TRI and MEM Icons
GMRS NOTE
VHF
R The radio must be squelched for Tri-Watch mode to
X
T
function. See page 17 for Squelch procedure.
A
B
U I C Tri-Watch Setup
ATIS VOX LOMEDHI SAME MEM
To Program or Edit the Tri-Watch Channels:
1. Press and hold the TRI-WATCH button from Marine
Standby mode for two (2) seconds to activate
Channel Up/Down Button
Tri-Watch Setup mode. The MEM icon on the display
MARINE HH50
will turn On and the matrix will display TW MEM
ENTER 01.
NOTE
The main channel number will flash to indicate channel
CALL
position. If there is no input activity for 15 seconds, the
ENT SETUP
radio will sound three (3) beeps and return to Marine
Standby mode.
2. Press Channel Up/Down button to select the desired
Tri-Watch channel.
3. Press and release TRI-WATCH button or
Call/Enter/Setup button to confirm entry.
4. Repeat steps 2 and 3 to program the remaining
additional Tri-Watch memory channel.
5. After programming both Tri-Watch memory
channels the radio will immediately engage
Tri-Watch mode.
Nothing Comes Close to a Cobra ® 29