Table of Contents
Advertisement
Setup Mode Programming
VHF Marine Radio Protocols
Operating Your Radio
Rewind Enable/Disable
Channel Up/Down Button
MARINE H
If Rewind is enabled, the last 20 seconds of incoming
audio is recorded and you can play back missed VHF calls
by pressing the Rewind button.
1. Display will show the Rewind icon flashing and the
matrix will display REWIND ENABLE or DISABLE.
CALL
2. Press Channel Up/Down button to select ENABLE
ENT SETUP
or DISABLE.
Rewind Enable
GMRS
3. Press Call/Enter/Setup button to save entry.
VHF
R
X
T
A
B
U
C I
ATIS VOX LOMEDHI
SAME
MEM
ATIS ID Programming
The Automatic Transmission Identification System (ATIS) feature of this Cobra radio
is used to identify marine vessels in some inland waterways of European countries
that require ATIS transmission. An ATIS ID number is required to operate the ATIS
feature. The ATIS ID number is derived from your vessel's call sign. You must enter
your ATIS ID number into this radio before the ATIS system will become functional.
Please consult your local dealer for questions about local ATIS requirements. The use of
ATIS is prohibited outside the European inland waterways covered by the Basel Agreement.
With this feature activated the vessels ATIS ID number is transmitted after every
push of the Talk button.
Channel Down and
To Set the ATIS ID Number:
SCAN Buttons
NOTE
The ATIS ID is a 10-digit number that will always begin
CALL
ENT SETUP
16
TW
with the number "9." You will be asked to enter only the
MEM
last nine digits. The first digit, "9," has been
ESC
automatically entered for you.
1. With the radio turned Off, press and hold the Channel
Down and SCAN buttons and simultaneously power
On the radio.
20 English
Setup Mode Programming
VHF Marine Radio Protocols
Operating Your Radio
2. The LCD will display the ATIS icon. A dash (-), to the
ATIS ID Start Screen
right of the digit "9," will be flashing for the next entry.
GMRS
ROG
VHF
R
X
NOTICE
T
Remember, you only have one (1) attempt to set the
A
B
U
I
C
ATIS ID number. Once this number has been entered,
ATIS
VOXLOMEDHI
SAME
MEM
only your Cobra distributor can reset the ATIS ID number.
You can also return the radio to Cobra for reprogramming.
MARINE HH50
3. Press the Channel Up/Down button to scroll through
Channel Up/Down Button
the specific ATIS digit being entered.
4. Pressing the Call/Enter/Setup button advances to
the right, one (1) digit, for the next entry.
5. Repeat this input sequence until all nine digits have
CALL
been entered. The nine digits will be displayed on the
ENT SETUP
matrix. The ATIS icon will stop flashing when a
ATIS ID Number Entry
successful ATIS ID entry has been made.
•
GMRS
ROG
6. Press the Call/Enter/Setup button again, after all
VHF
R
numbers have been entered, to save the ATIS ID
X
T
number and return to the Marine Standby mode.
A
B
U
I
C
ATIS
VOX LOMEDHI
SAME
MEM
Nothing Comes Close to a Cobra
®
21
Advertisement
Table of Contents
