Setup Mode Programming - Cobra CobraMarine MRHH150FLTE Owner's Manual

Setup Mode Programming

Intro Operation Customer Warranty
Operating Your Radio VHF Marine Radio Protocols VHF Marine Radio Protocols
Assistance
Intro Operation Customer
Assistance
Setup Mode Programming
The following series of procedures is designed to allow you to set the programmable
Customer
Installation
Assistance
features of your radio. Correctly following these steps results in a minimal amount of
radio setup programming time.
econdary Icons
Customer
Installation
Assistance
ain Icons
NOTE
Secondary Icons
When in the Setup mode, if you stop programming for longer than 10 seconds,
Notice Caution Warning
your entry will be saved and the radio will go back to the Marine Standby mode.
Pressing any of the non-programming buttons (Talk, Dual-Watch/Scan, H-M-L,
Intro Operation Customer Warranty
Instant Channel 16+) will also exit Setup mode and invoke the button function or
Notice Caution
Assistance
return the radio to Marine Standby mode.
When you return to Setup mode and continue programming you will see the last
Customer
"value" displayed. While in the Setup mode, you will not receive any signal reception.
Installation
Assistance
econdary Icons
Marine (VHF) Mode Programming
Programming these features will allow you to customize certain features of this radio
Notice Caution Warning
to enhance your "On-Water" audio needs.
MARINE HH150
Start from Marine Standby mode to begin Marine (VHF) Setup
Enter/Setup Button
programming. Press and hold the Enter/Setup button for three
SETUP
seconds to enter the programming mode.
H-M-L ENTER
ANNEL
16+
VOL +
ERSIBLE
14 English
Warranty
Warning
FLOATING MARINE HH150
ESC
PWR
MEM
SC/DW
VOL
SUBMERSIBLE
VHF Marine Radio Protocols VHF Marine Radio Protocols Operating Your Radio
Intro Operation
International/Canada/U.S.A. Channel Maps
•
Three sets of VHF Channel Maps have been established for marine use in the U.S.A.,
Canada, and the rest of the world (International). Most of the channels are the same for all
three maps, but there are definite differences (see table in the Appendix). Your radio has all
Installation
three maps built into it and will operate correctly in whichever area you choose.
Main Icons
Secondary Icons
Set Channel Map
Notice
Active Channel Map Icon
FLOATING MARINE HH150
Secondary Icons
WEATHER SETUP
ESC
PWR H-M-L
MEM
H-M-L Channel Up/Down Buttons
ENTER
CHANNEL
SC/DW
CHANNEL
VOL
+16
SUBMERSIBLE
VOL
Setup Mode Programming
Customer Warranty
Assistance
Customer
Assistance
To Set Channel Map Operating Area:
1. The Channel Map mode is the first mode that begins the
Marine (VHF) Setup programming.
2. U, I and C will display, with the current setting
Caution Warning
Intro Operation Customer Warranty
(the U icon is the default) flashing.
Assistance
3. Press Channel Up/Down buttons to select the
U, I or C icon.
Customer
Installation 4. Press Enter/Setup button to save this entry and move to the
Assistance
next setup programming mode.
NOTE
SETUP
One or two of the channel maps might have been
ENTER Notice Caution Warning
disabled for sales of this radio in some countries.
16+
VOL +
Nothing Comes Close to a Cobra
® 15