Table of Contents
Advertisement
Measure clutch play a between
9
handlebar fitting and clutch
lever in this position.
116
Clutch lever play
0.02...0.04 in (0.5...1.0 mm)
(on the handlebar fitting,
when the engine is cold)
If clutch play is outside tolerance:
Adjusting clutch lever play
(
116).
z
Adjusting clutch lever
play
To increase clutch play: screw
screw 2 into handlebar fitting.
To decrease clutch play: screw
screw 2 out of handlebar fit-
ting.
Checking clutch lever play
(
115).
Repeat work steps until clutch
play is correctly adjusted.
Tires
Checking tire tread depth
The handling of your mo-
torcycle can already change
for the worse before the legally
prescribed minimum tread depth
is reached.
Have tires replaced even be-
fore the minimum tread depth
is reached.
Make sure ground is level and
firm and park motorcycle.
Measure tire tread depth in
main tread grooves with wear
indicating marks.
Tires have wear indicators
integrated into the main
tread grooves. If the tire tread
has worn down to the level of
the marks, the tire is completely
worn. The locations of the marks
are indicated on the edge of the
tire, e.g. by the letters TI, TWI or
by an arrow.
Advertisement
Table of Contents
