Tires - BMW K 1300 S Rider's Manual

All manuals and user guides at all-guides.com
adjustment is completed, the One-up
display is automatically hidden
again.
One-up with luggage
Setting loading state
Start engine.
Two-up (with luggage)
The loading state cannot
be set while driving.
If no further changes are made,
the loading state is set as indi-
cated.

Tires

Checking tire pressure
Incorrect tire inflation pres-
sure results in poorer hand-
ing characteristics of the motor-
cycle and reduces the life of the

tires.

Press button 1.
Ensure proper tire inflation
Current setting is displayed.
pressure.
Press and hold button 1 until
display changes each time. At high road speeds, tire
valves installed perpen-
Starting from the current state,
the display is in the following or- dicular to the wheel rim have a
der:
tendency to open as a result of
4
centrifugal force.
In order to avoid a sudden loss of
65
tire inflation pressure, fit a valve
cap with rubber sealing ring to
the rear tire and make sure that
the cap is screwed on firmly.
Make sure ground is level and
firm and park motorcycle.
Check tire pressures against
data below.
z
Tire pressure, front
36.3 psi (2.5 bar) (Single rid-
er, with cold tire)
36.3 psi (2.5 bar) (Driver with
passenger and/or load, with
cold tire)
Tire pressure, rear
42.1 psi (2.9 bar) (Single rid-
er, with cold tire)