BMW S 1000 RR 2010 Rider's Manual page 52

4
50
To increase damping: turn ad-
justing screw with tool of on-
board toolkit so that marking 2
z
points to a higher scale value.
To decrease damping: turn
adjusting screw with tool of on-
board toolkit so that marking 2
points to a lower scale value.
Rebound stage, basic
setting, front
Position 2 (comfortable
setting with driver 187 lbs
(85 kg))
Position 5 (normal setting
with driver 187 lbs (85 kg))
Rebound stage, basic
setting, front
Position 8 (sporty setting
with driver 187 lbs (85 kg))
Adjusting compression
damping for rear wheel
Make sure ground is level and
firm and park motorcycle.
Adjust compression damping
for long thrusts (low speed)
with adjusting screw 1 and
compression damping for short
thrusts (high speed) with ad-
justment ring 2.
To increase damping: turn ad-
justing screw or adjustment
ring with tool of onboard toolkit
so that marking 3 or 4 points
to a higher scale value.
To decrease damping: turn
adjusting screw or adjustment
ring with tool of onboard toolkit
so that marking 3 or 4 points
to a lower scale value.