Table of Contents
Advertisement
4
44
With the coding plug installed,
the driving mode
is also offered in the selection
z
menu.
Install coding plug. (
Press button 1 repeatedly until
SLICK
4
selection arrow is located be-
fore desired setting.
45).
and assumes very good adhesion
values, as are usually found on
racetracks only. Corresponding
driving ability is also assumed.
Enable SLICK mode on race-
tracks only, and only with racing
tires.
When selecting the SLICK
mode: observe the restricted
ABS control for the rear wheel
SLICK mode is designed
for racing tires (slick tires)
(see the chapter "Technology
in detail").
When the motorcycle comes
to a stop, the selected driving
mode is activated after approx.
ten seconds.
The new driving mode is acti-
vated while driving under the
following conditions:
Brake not actuated
Throttle turned all the way
back
Clutch actuated
After the new driving mode is
activated, the selection menu
disappears.
The configured driving mode
with the corresponding adapta-
tions of the engine character-
istics, ABS and DTC is main-
tained, even after the ignition is
switched off.
Advertisement
Table of Contents
