Table of Contents
Advertisement
Setting parameter
Press and hold button 2 until
displayed parameter begins to
flash.
Press button 1 or button 2 re-
peatedly until desired value is
displayed.
If desired value is displayed:
Press and hold button 2 un-
til displayed value no longer
flashes.
The value has been saved.
Exiting settings
Press and hold button 1 until
multifunction display switches
over to ROAD mode.
A value which is still flashing
will not be saved.
As an alternative, press but-
ton 1 or button 2 repeatedly
SETUP RETURN
until
played.
If "SETUP RETURN" is
displayed:
Press and hold button 2 to exit
SETUP mode.
SETUP MENU
is indicated.
Switch-on speed of
shifting flasher
Display of switch-on speed in
rpm.
is dis-
6
83
z
Advertisement
Table of Contents
