Table of Contents
Advertisement
Technical Specifications
.
Operating pressure range
Dimensions (H x W x D)
Weight
Power Supply
Air Filter
Air Tubing
Air Outlet
IEC 60601-1 Classifications
DECLARED DUAL-NUMBER NOISE EMISSION VALUES in accordance with ISO 4871:
Sound Pressure Level
Sound Power Level
Supplemental Oxygen
Housing Construction
Operating Temperature
Operating Humidity
Storage and Transport
Temperature
Storage and Transport
Humidity
Operating Altitude
Electromagnetic
Compatibility
Note: The manufacturer reserves the right to change these specifications without notice.
4 to 20 cm H
O
2
112 mm x 164 mm x 145 mm
1.3 kg
•
Input range for S8 Lightweight II with HumidAire 4i:100–240V,
50/60Hz; 110V, 400Hz; 2.5A < 140VA (110W) (maximum power
consumption). Instantaneous peak power consumption <340VA.
•
Refer to the DC-12 converter instructions for DC ratings. Only
use the ResMed DC-12 converter for DC input.
•
Typical power consumption at 20 cm H
Two-layered, powder-bonded, polyester non-woven fiber
Flexible plastic,2 m
The 22 mm conical outlet complies with EN 1281-1
Class II (double insulation), Type CF
26 dBA with uncertainty of 2 dBA as measured according to
ISO 17510-1: 2002
28 dBA with uncertainty of 2 dBA as measured according to
ISO 17510-1: 2007
36 dBA with uncertainty of 2 dBA as measured according to
ISO 17510-1: 2007
Recommended maximum supplemental oxygen flow: 4 L/min
Flame retardant engineering thermoplastic
+5ºC to +35ºC
10%–95% non-condensing
-20ºC to +60ºC
10%–95% non-condensing
Sea level to 2591 m
Product complies with all applicable electromagnetic compatibility
requirements (EMC) according to IEC60601-1-2, for residential,
commercial, and light industry environments.
The electromagnetic compatibility tables for these ResMed devices
can be found on www.resmed.com, on the Products page under
Service & Support. Click on the PDF file for your device.
0 is 34VA or 20W.
2
Technical Specifications
13
Advertisement
Table of Contents
