Related Manuals for ResMed VPAP Adapt
Summary of Contents for ResMed VPAP Adapt
- Page 1 VPAP Adapt ™ POSITIVE AIRWAY PRESSURE DEVICE ™ HEATED HUMIDIFIER Welcome Guide English...
- Page 3 Welcome Thank you for choosing the S9 VPAP Adapt or H5i. Before operating this device, please read the entire Welcome and Information Guides. DC power inlet Module/Adapter port Air filter Air outlet SD card slot S9 at a glance The S9 system comprises the following elements: •...
- Page 4 Flip lid seal Flip lid Air outlet Release button ClimateLine or ClimateLine connection port Latch H5i water tub H5i at a glance The H5i system comprises the following elements: • H5i heated humidifier • H5i water tub • ClimateLine heated air tubing (if sold as a Climate Control Kit) Optional components include: •...
- Page 5 6. Connect the assembled mask system to the free end of the air tubing. Notes: • For more information on assembling your mask see your mask user guide. • Recommended masks are available on www.resmed.com on the Products page under Service & Support. English...
-
Page 6: Filling The Water Tub
Filling the water tub 1. Slide the latch and lift open the flip lid. 2. Remove the water tub. 3. Fill the water tub (through the center hole) with distilled or deionized water up to the maximum water level mark (380 mL). 4. - Page 7 LCD screen Displays the menus, treatment screens and reminders. Start/ Stop button Starts or stops treatment. Key: Home Humidity level Setup menu Ramp Allows you to make changes Heated tube to settings or exit from the Climate Control menu. Info menu Allows you to Start/ Stop view your sleep...
- Page 8 Adjusting humidity level Ranging from OFF to 6, you can adjust the humidity level at any time to find the setting that is most comfortable for you. To adjust your level of humidity: 1. From your HOME 3. Turn until 2.
-
Page 9: Using Mask-Fit
Adjusting ramp time Designed to make the beginning of treatment more comfortable, ramp time is the period during which the pressure increases from a low start pressure to the treatment pressure. To adjust your ramp time: 1. From your HOME 2. -
Page 10: Selecting The Mask Type
Selecting the mask type To select your type of mask: 1. Press . The SETTINGS 2. Turn until Mask is 3. Press . The selection is screen is displayed. displayed in blue. highlighted in orange. 4. Turn until the mask 6. -
Page 11: Getting Started
Getting started 1. Make sure the power is connected. 2. Adjust the ramp time or humidification level if required. 3. Fit your mask as described in your mask user guide. 4. To start therapy, simply breathe into the mask and/or press 5. -
Page 12: Viewing The Treatment Screens
Viewing the treatment screens Depending on how the system has been configured, you will see one of the following example screens once therapy has started: 9 H5i humidifier 9 H5i humidifier 9 H5i humidifier 9 ClimateLine or ClimateLine 9 ClimateLine or ClimateLine heated air tube heated air tube 9 Climate Control –... -
Page 13: Cleaning And Maintenance
Viewing the Info menu The Info menu has a series of screens showing your sleep quality, sleep report and service information. To view the Info menu, push from your HOME screen. 9 In the Sleep Quality screen, 9 In the Sleep Report, only the 9 In the Service information, you can always view your period can be changed—... - Page 14 Weekly 1. Remove the air tubing from the S9 device and the mask. 2. Wash the air tubing in warm water using mild detergent. 3. Rinse thoroughly, hang, and allow to dry. 4. Before next use, reconnect the air tubing to the air outlet and mask. Monthly 1.
- Page 15 1. Remove the air filter cover from the back of the S9 device. 2. Remove and discard the old air filter. 3. Insert a new ResMed air filter ensuring that it is sitting flat in the air filter cover. 4. Replace the air filter cover.
- Page 16 S9 SD Card Protective Folder provided with your device. Please retain the S9 SD Card Protective Folder for future use. Notes: • For Troubleshooting information refer to the Information Guide. • For more product information see www.resmed.com.
- Page 18 ResMed locations worldwide. S9 VPAP Adapt: Protected by patents: AU 691200, AU 697652, AU 702820, AU 709279, AU 724589, AU 730844, AU 734771, AU 736723, AU 750095, AU 750761, AU 761189, AU 764761, AU 779327, AU 2003236487, AU 2006225224, AU 2007252223, EP...