Table of Contents
Advertisement
Quick Links
Power Patch Panel
™
DPoE
User Manual
For Parts DPOE24U1XY, DPOE24S1XY, DPOE12U1XY
Copyright © 2008 PANDUIT Corp. All rights reserved. No part of this book shall be reproduced, stored in a retrieval
system, or transmitted by any means, electronic, mechanical, photocopying, recording or otherwise, without written
permission from PANDUIT. No patent liability is assumed with respect to the use of the information contained herein.
Although every precaution has been taken in the preparation of this book, PANDUIT assumes no responsibility for
errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained
herein.
Part # PN378E
Published October 2008
Advertisement
Table of Contents
Troubleshooting
Subscribe to Our Youtube Channel
Related Manuals for Panduit DPOE24S1XY
Summary of Contents for Panduit DPOE24S1XY
-
Page 1: User Manual
User Manual For Parts DPOE24U1XY, DPOE24S1XY, DPOE12U1XY Copyright © 2008 PANDUIT Corp. All rights reserved. No part of this book shall be reproduced, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording or otherwise, without written permission from PANDUIT. -
Page 2: Safety Warning
Unless otherwise specified, all products presented in this user's guide are warranted against defects in material and workmanship for a period of one year from the date of sale to the initial purchaser. PANDUIT Corp. warrants that its firmware designed by PANDUIT Corp. for use with the product will execute its functions when properly installed in the product for one year from the date of sale to the initial purchaser. -
Page 3: Table Of Contents
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E TABLE OF CONTENTS SAFETY WARNING ......................2 WARRANTY ........................2 TRADEMARKS ....................... 2 OVERVIEW ........................6 Features and Benefits ....................7 INSTALLATION ......................9 Power Requirements ....................9 Package Contents ...................... 9 Panel Mounting Procedure .................. - Page 4 Figure 10: View Message Log Screen ................43 Figure 11: View Message Log Filter Parameter Screen ..........44 List of Tables Table 1: Power Supplies Available from PANDUIT ............9 Table 2: Package Contents ..................... 9 Table 3: PANDUIT Corporation Contact Information ............. 10 Table 4: Color-Coded Wire Positions for 802.3af-2003 Compliant Devices ....
- Page 5 Table 12: DPoE™ Element Manager Log Messages ............ 49 Table 13: DPoE™ Power Patch Panel Firmware Update LED Status ......52 Table 14: Power Supplies Available from PANDUIT ............. 53 Table 15: Package Contents ..................53 Table 16: PANDUIT Corp Contact Information .............. 54 Table 17: Color-Coded Wire Positions for 802.3af-2003 Compliant Devices ....
-
Page 6: Overview
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E OVERVIEW The DPoE™ Power Patch Panel provides a reliable and cost-effective solution for Power over Ethernet (PoE) applications, complaint with the IEEE 802.3af-2003 specifications. Each DPoE™ Power Patch Panel allows centralized powering of up to 24 devices, such as Internet Protocol-based (IP) telephones, Network Security Cameras, or Wireless Devices, over the same cabling used to provide the Ethernet connectivity. -
Page 7: Features And Benefits
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Figure 2: DPoE™ Power Patch Panel (Rear View) Features and Benefits The following table highlights some of the capabilities of the DPoE™ Power Patch Panel along with the tangible benefit to the network operator. - Page 8 PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E DPoE™ Power Patch Panel Feature Benefit Full power to all ports With all ports on the panel capable of delivering full PoE power, there’s no need to load balance across panels, design special wiring schemes or leave ports unused in the panel.
-
Page 9: Installation
The DPoE™ Power Patch Panel requires a direct connection to a nominal -48VDC supply. A power supply may be purchased separately from PANDUIT or other vendors. Installation instructions for the individual power supply are included with that product. PANDUIT provides multiple individual power supply options as listed below. -
Page 10: Table 3: Panduit Corporation Contact Information
Two butt splices may be used to extend the 10 Foot Power Harness. (Do not exceed a total length of 35 feet). Verify the above contents arrived in good condition. If not, contact PANDUIT Technical Support. Table 3: PANDUIT Corporation Contact Information PANDUIT Technical Support Fax:... -
Page 11: Panel Mounting Procedure
Finally, attach the loose end of the grounding strap to the rack within the same position as the panel. PANDUIT Structured Ground Kits for Data Center Rack ® Grounding can be used to properly ground PANDUIT NetRack Rack Systems and racks from most other manufacturers. -
Page 12: Network Connection
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Network Connection 5. If the DPoE™ Element Manager is not being used to remotely manage the network of DPoE™ Power Patch Panels, skip to Connecting the Powered Devices below. Otherwise, using a... - Page 13 NOTE: Never install wiring in a slot previously used for a larger gauge wire. 10. Using the recommended punchdown tool (PANDUIT part number PDT110), punch down the connector into the punchdown slots on the back of the DPoE™ Power Patch Panel.
-
Page 14: Power Requirements
11. If the panel is being powered by a DPoE™ Power Supply (See page 9, Table 1: Power Supplies Available from PANDUIT for a list of available powering options), skip to Powering Up the DPoE™ Power Patch Panel Section below, since the DPoE™ Power Supply is equipped with a matched keyed power connector that will fit the power connector on the back of the panel. -
Page 15: Powering Up The Dpoe™ Power Patch Panel
Basic Troubleshooting Use the following guide to help resolve problems installing the DPoE™ Power Patch Panel. If the problem persists, contact PANDUIT Technical Support or a local sales representative. (See Table 3: PANDUIT Corporation Contact Information, for contact information.) -
Page 16: Table 7: Basic Troubleshooting Guide
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Table 6: Basic Troubleshooting Guide Problem Possible Causes and Solutions The panel status LED does not light when power 1. The power supply fuse may be blown. Check is applied to the unit. -
Page 17: Operation
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E OPERATION LED Indicators The DPoE™ Power Patch Panel displays system and port status through the use of LEDs on the front and rear of each panel. There is one panel status LED on the front left of the panel, 24 individual port status LEDs above each port, and two network status LEDs on the rear of the unit. - Page 18 PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E LED Color Port LED Description Status of Power Ports Status Solid The system has failed to determine the Power is NOT being PD power requirements for this port. delivered down this port on Perhaps this PD is not an 802.3af-2003...
-
Page 19: Dpoe™Element Manager Software
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E DPoE™ ELEMENT MANAGER SOFTWARE The DPoE™ Element Manager software is used to remotely control, configure and monitor a DPoE™ Power Patch Panel within a network. Once installed on a shared or dedicated Windows-based Personal Computer (PC), the DPoE™... -
Page 20: Installing The Dpoe™ Element Manager Software
Tools CD, remove the CD-ROM from the CD-ROM drive, and store it in a safe place. Next, launch the DPoE™ Element Manager application via the icon on the desktop. The splash screen will appear. When prompted, UserName: administrator, Password: Panduit (password is case sensitive and should be changed from this default) NOTE: The DPoE™... -
Page 21: Connecting The Dpoe™ Element Manager Host Computer To The Dpoe™ Power Patch Panel
UserName and password. NOTE: When the management system is first installed, the default UserName is administrator with a password of Panduit (notice the capital “P”). Passwords are case-sensitive. This default UserName and Password should be changed once the user is familiar with the DPoE™... -
Page 22: Graphical User Interface
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Graphical User Interface The DPoE™ Element Manager has an easy-to-use graphical user interface with pull-down menus and tool bars, which make configuring and provisioning the network easy. When the DPoE™ Element Manager software is opened, the following system-level opening screen appears. -
Page 23: Additions Or Changes To Username/Password
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E If the operator selects an individual panel from the Tree View of the network area, a second screen, which overlays the Message Log and List View areas, allows the operator to configure and monitor a specific DPoE™... -
Page 24: Panel Discovery
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Panel Discovery Once the DPoE™ Element Manager is connected into the network, the “Discover” capability can be used to "find" the deployed DPoE™ Power Patch Panels (refer to Connecting the DPoE™ Element Manager Host Computer to the Host DPoE™... -
Page 25: Subnet Search
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Subnet Search After selecting a Subnet option, the Add, Edit, and Remove buttons become active and give the network operator a chance to enter or modify the subnet information in the DPoE™ Element Manager prior to starting the Subnet search. - Page 26 PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E After entering the Starting IP Address, Ending IP Address, and SNMP Write Community , the Start button will initiate the Discover capability. Whether a subnet search or an IP range search was conducted, the discovered DPoE™ Power Patch Panel information will be populated in the DPoE™...
-
Page 27: Provisioning The Panel
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Provisioning the Panel The DPoE™ Element Manager has the capability to discover all of the DPoE™ Power Patch Panels in the network and display them in a format where the panels are grouped by their host racks based on the information entered into the panels during the provisioning process. - Page 28 PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E If the computer running the DPoE™ Element Manager is not in the subnet for the new NOTE: IP address and cannot communicate with it, you will receive a timeout message...
- Page 29 PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E 5. The table contains the MAC and IP address of the all of the discovered DPoE™ devices. The message log will include the MAC and IP address of the newly discovered device(s). The MAC Address can now be used to associate the discovered device with the information contained on the installation worksheet, and the Panel Attributes can now be entered.
- Page 30 PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E The DPoE™ Power Patch Panel name, rack name, rack space position, and contact name should be entered here like the previous example. The DPoE™ Element Manager will create a rack with that name, and any device that has the same rack name will be grouped under that rack.
-
Page 31: Administering Port And Panel-Level Information
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E right clicking, and choosing “Paste Panel." All of the Panel Attributes will be applied to the new device. Select “Edit Panel” and edit Panel Attributes and make the appropriate modifications. -
Page 32: Edit Panel Information
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E The top portion of the panel-level opening window provides a view of the DPoE™ Power Patch Panel, complete with the current LED status, IP address, rack name and rack location. The information on this screen can be edited by selecting the Edit Panel Info…... -
Page 33: Active Port Indicator
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Active Port Indicator By clicking on any device port, its status information will be displayed and the selected port will be highlighted with a yellow flashing indicator on the EMS screen. -
Page 34: Panel Ip Address
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Panel IP Address The DPoE™ Power Patch Panels come with a factory setting of DHCP address assignment. After the panel is connected to the DPoE™ Element Manager, the network administrator may change this setting by adding an IP address &... -
Page 35: Snmp Retry
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E SNMP Retry While running the DP E™ Element Manager Software you may receive a timeout message: In certain network conditions you may want to select the number of times a SNMP message retry occurs prior to receiving this Timeout error message. -
Page 36: Trap Settings
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Trap Settings The Trap Setting section allows the network operator to configure the DPoE™ Power Patch Panel to send configuration and alarm messages to up to three different IP addresses. -
Page 37: Backup Of Panel And Port Information
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Backup of Panel and Port Information Once a DP E™ device has been discovered, information from that device can be exported using the Export Device Information in the Tools menu bar. This may be necessary if the DP E™... -
Page 38: Restoring Device And Port Information
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Once confirmed, another dialog box will appear and require a file name (such as “Panel A Ports”) and a desired location to save the file. Once the Device and the Port information are saved, factory resets, firmware downloads, or other reconfigurations may be performed, with the ability to restore the previous device and port configuration information. -
Page 39: View Port Information
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E A pop-up window will ask for confirmation to import the device information. A pop-up window will also ask for confirmation to import the port information. After confirmation, the Import Port screen will appear, requiring the previously saved panel port information (from the Export exercise) to be located and opened. -
Page 40: Edit Port Information
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Clicking the View Port Info button will display the following screen and allow the network operator to administer the ports on a given DPoE™ Power Patch Panel. Figure 8: View All Ports Screen... -
Page 41: Figure 9: View Individual Port Screen
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Figure 9: View Individual Port Screen Clicking on the Edit button will bring up a screen to edit individual ports on a DPoE™ Power Patch Panel. If the network operator were simultaneously configuring multiple ports, the Multiple Port Edit screen would... -
Page 42: Export Log
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Administration Control - This setting (ON/OFF) allows the network operator to control whether each individual port is sourcing PoE power. If this field is set to off, the port acts like any port on a non- powered patch panel rather than a PoE port. -
Page 43: View Entire Log
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E View Entire Log The View Entire Log button on the tool bar on the View Panel Screen can be used to view log file. Viewing the message logs can also be activated from most points within the DPoE™ Element Manager using the button on the top tool bar. -
Page 44: Export Log
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Figure 11: View Message Log Filter Parameter Screen Network operator can sort through and view this subset by any combination of: • Date range • Rack number or range of rack numbers •... -
Page 45: Refresh The Network
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Refresh the Network Refresh option under the Devices pull-down menu or the button ( ) on the top tool bar provides an easy mechanism to make sure that the configuration and status information in a deployed network of DPoE™... -
Page 46: Search For Specific Panel(S) Or Port(S)
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Before any e-mail messages can be sent from the system, the SMTP Server and NOTE: Source E-mail Address fields must be entered. The Source E-mail Address will be used as the "from" address on all e-mails sent from the Element Manager. - Page 47 PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Panel level searches can be conducted by any combination of: • MAC address • Panel Name • Rack Name • Rack Space Location • Hardware Version • IP Address •...
- Page 48 PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Port level searches can be conducted by any combination of: • Port Number • PD Type • Work Area Location • Administration Control • Detection Status • Power Priority •...
-
Page 49: Dpoe™ Element Manager Log Messages
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E DPoE™ Element Manager Log Messages The following types of messages are generated within the DPoE™ Power Patch Panel network and are displayed in the DPoE™ Element Manager logs. While most of these messages are generated by a DPoE™... -
Page 50: Miscellaneous Settings
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Miscellaneous Settings Several miscellaneous settings must be configured for the DPoE™ Element Manager to communicate properly with a deployed network of Power Patch Panels. The Settings option under the Tools pull-down menu provides an easy mechanism to administer these settings. -
Page 51: Detailed Description Of The Firmware Update
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Insure that the DPoE™ device is connected to a Network with the PC that has the DPoE™ Element Manager application running and has the device to be programmed discovered (refer to Panel Discovery section). -
Page 52: Exiting The Dpoe™Element Manager
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Table 12: DPoE™ Power Patch Panel Firmware Update LED Status System LED Network LED State Description Elapsed Time Color and activity Color and activity Ethernet Switch 00 – 01 seconds... -
Page 53: Appendix 1 - Installation
The DPoE™ Shielded Power Patch Panel requires a direct connection to a nominal 48VDC supply. An individual power supply may be purchased separately from PANDUIT or other vendors. Installation instructions for the individual power supply are included with that product. PANDUIT provides multiple individual power supply options as listed below. - Page 54 ’ are used to secure the shielded cable to the rear shield, and secure the shield. Verify the above contents arrived in good condition. If not, contact PANDUIT Technical Support. Table 15: PANDUIT Corp Contact Information PANDUIT Technical Support Fax:...
-
Page 55: Panel Mounting Procedure
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Panel Mounting Procedure WARNING: Only trained and qualified service personnel should install or service DPoE™ Power Patch Panels. Before installing or servicing DPoE™ Power Patch Panels or communication wiring, be aware of the hazards with the associated electrical circuitry. -
Page 56: Table 4: Color-Coded Wire Positions For 802.3Af-2003 Compliant Devices
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Connecting the Powered Devices 6. After the cables are properly terminated, place conductors into the punchdown slots in the appropriate wiring sequence. In order to support pre-standard powered devices utilizing Cisco Inline Power, the ALT POE "A"... -
Page 57: Table 5: Color-Coded Wire Positions For Alternate Poe Devices
Record port information on the DPoE™ Power Patch Panel Installation Worksheet (PANDUIT part no. PN377*). To ensure proper shielding, there must be approximately 1" (25.4 mm) between the cable foil or braid covered with copper tape and the punchdown connector. -
Page 58: Networking The Panels (Optional)
12. Using the two butt splices provided with the panel, and paying attention to the polarity of the supply voltage, crimp the power harness wires to the supply wires. A crimping tool, such as the PANDUIT part number CT-100, can be used. The provided butt splices (PANDUIT part number BSV14X) support 14-16 AWG solid or stranded wire. - Page 59 Close the shields together over the cables and secure with PAN-TY's (PANDUIT part no. PLT1.5I-M). Fasten the shields together using US standard screws with the grounding strap in-...
-
Page 60: Powering Up The Dpoe™ Power Patch Panel
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E 16. Secure the cables to the shield tabs with the remaining PAN-TY's. Powering Up the DPoE™ Power Patch Panel 17. Apply power the panel. Once power is applied to the unit, the DPoE™ Power Patch Panel will go through its power up sequence. - Page 61 PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Behavior as viewed from the back of the unit Behavior as viewed from the front of the unit If the panel were set to static IP addressing rather If the panel were set to static IP addressing rather...
-
Page 62: Technical Specifications
Mounts to standard EIA 19” rack or 23” rack when used with panel extender Mounting Option: brackets (PANDUIT part number PEB1). Extender brackets are not included with the DPoE™ Power Patch Panel. Packaging See page 9, Table 2: Package Contents... -
Page 63: Glossary
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E GLOSSARY American Wire Gauge DHCP Dynamic Host Configuration Protocol IEEE Institute of Electrical and Electronic Engineers Internet Protocol Light-Emitting Diode Media Access Control Megahertz Network Management System o.d. Outside Diameter... -
Page 64: Appendix 2 - Tftp Server Install
PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E APPENDIX 2 - TFTP SERVER INSTALL There are many excellent TFTP Servers readily available on the Internet that run on all types of computer platforms: Windows, Linux, DOS, Mac, etc. - Page 65 PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Click “Yes” Click “Next”...
- Page 66 PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Click “Finish” Now run the program. Move your mouse to the Start Menu (lower left corner): Start Menu-> All Programs -> Solar Winds Free Tools -> TFTP Server Go to the “File -> Configure” menu...
- Page 67 PANDUIT® DPoE™ Power Patch Panel User Manual Part Number: PN378E Select the directory that contains the new DPoE product file. (i.e. C:\tftp_dir) That is it! Your TFTP server has now been configured correctly. After the download works you will see something like this on the screen that shows the file transfer.
Need help?
Do you have a question about the DPOE24S1XY and is the answer not in the manual?
Questions and answers