Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Piranha Hercules 2300W
Summary of Contents for Piranha Hercules 2300W
- Page 1 Piranha Hercules 2300W Vacuum Cleaner USER MANUAL MODEL NO: 900035...
- Page 2 IMPORTANT Read this instruction booklet carefully before operation. • Before using the appliance, check that the mains power voltage corresponds with • the voltage shown on the rating plate. Always remove the plug from the power socket when the appliance is not in use and •...
- Page 3 DESCRIPTION A. Curved Handle B. Air Flow Adjustor C. Extension Steel Tube D. Adjustable Floor Brush E. Crevice Tool F. Round Brush Tool G. Flexible Hose H. Accessories Cover I. Dust Bag Full Indicator J. Hose Connector K. Front Cover Release Button L.
- Page 4 Fitting the Extendable Telescoping Tube and Accessories 1. Attach the Extension Steel Tube to the Curved Handle of the Flexible Hose. 2. Lengthen the Extension Steel Tube by pushing the lock inwards ( ) and then pulling the tube out ( ). 3.
- Page 5 3. You can adjust the Suction by sliding the Air Flow Adjustor on the curved handle to control the suction. The suction will be reduced the more you open the adjustor ( ). For maximum suction keep the adjustor closed ( ). 4.
-
Page 6: Replacing The Dust Bag
Using the Cleaning Accessories Use the Round Brush Tool and Crevice Tool for cleaning corners, edges, drawers, curtains, shelves, books, inlaid furniture, lamps and other delicate or hard to reach objects. Dust Bag Full Indicator When the suction tube/hose is obstructed or the dust bag is full, the Dust Bag Full Indictor will appear RED. - Page 7 3. Slide the disposable dust bag out of the housing and discard the full bag. 4. Slide in a new dust bag between the clips of the housing in the direction indicated by the arrow on the dust bag cardboard. 5.
- Page 8 3. To clean the exhaust HEPA filter, detach the Air Exhaust Cover ( ) by pulling firmly away from the Vacuum Cleaner ( ). Slide the HEPA filter up ( ) and pull it out ( ). 4. Wash the HEPA filter under running water and allow it to dry completely before putting it back into the vacuum cleaner.
Need help?
Do you have a question about the Hercules 2300W and is the answer not in the manual?
Questions and answers