Advertisement
5. Specifications of the Emulation Memory Board
Applicable compact emulator
Applicable MCU mode
Applicable power supply
Maximum operating frequency
6. Precautions
Warnings to Be Taken for This Product:
Do not disassemble or modify this product. Personal injury due to electric shock may occur if this product is
disassembled and modified. Disassembling and modifying the product will void your warranty.
Warning for Installation:
Do not set this product in water or areas of high humidity. Make sure that the product does not get wet. Spilling
water or some other liquid into the product may cause unrepairable damage.
Warning for Use Environment:
This equipment is to be used in an environment with a maximum ambient temperature of 35°C. Care should be taken
that this temperature is not exceeded.
Cautions to Be Taken for This Product:
Use caution when handling this product. Be careful not to apply a mechanical shock.
Do not touch the connector pins of this product directly. Static electricity may damage the internal circuits.
Caution to Be Taken for System Malfunctions:
If the emulator malfunctions because of interference like external noise, do the following to remedy the trouble.
(1) Press the RESET button on the emulator upper panel.
(2) If normal operation is not restored after step (1), shut OFF the emulator once and then reactivate it.
7. Inquiries
For the technical question about this product, fill in the text file which is downloaded from the following page, then send the
information to your local distributor.
http://tool-support.renesas.com/eng/toolnews/registration/support.txt
M3062PT3-CPE
Memory expansion mode (NORMAL, 4MB)
Microprocessor mode (NORMAL, 4MB)
2.7 -- 5.5 V
- Maximum operating frequency (at 5.0 V)
- Maximum operating frequency (at 3.0 V)
WARNING
CAUTION
(4/4)
0 wait:
7 MHz
1 wait:
20 MHz
2 wait and 3 wait:
24 MHz
0 wait:
6 MHz
1 wait:
17 MHz
2 wait and 3 wait:
24 MHz
Advertisement
