Table of Contents
Advertisement
Configuring the Unit via its Web Interface
System
4.4
System
Click [System] on the navigation bar to display the following page. As its name implies,
this page allows you to edit system-related parameters.
There are 3 sections that can be selected using the tabs below the menu bar: General,
Dante Network and Updates.
4.4.1 System > General
DEVICE SETTINGS
This is where you can edit global parameters related to the unit itself.
Device Name
This parameter helps users to identify the current ENC 1202 on a larger network.
The device name also doubles as the unit's host name.
Note:
• To access the ENC 1202's web interface remotely using your browser, remember to add ".local"
(or search domain) to the name shown here.
By default, the name is "ENC-1202-XXXXXX", where "XXXXXX" refers to the last six alphanu-
meric characters of the MAC address (see "The ENC 1202's address", p. 11). In addition
to changing the name here, you can specify it using the free Dante Controller software.
ENC 1202
Version 1.0
Page 22
Advertisement
Table of Contents
Need help?
Do you have a question about the ENCHORUS ENC 1202 and is the answer not in the manual?
Questions and answers