Table of Contents
Advertisement
Setting Up
The ENC 1202's address
Note:
• After logging in, you can open the web interface of other connected ENCHORUS-series' devices
by clicking an entry in the "NAME" column on the ENC 1202's "Browse Network" tab (see p. 42).
What if the ENC 1202's IP Address is not displayed?
If Dante Controller fails to display the IP address of a connected ENC-series device, pro-
ceed as follows:
1. Leave Dante Controller running.
2. Disconnect the ENC 1202 from the wall outlet (to switch it off).
3. Reconnect the ENC 1202 to a wall outlet.
4. Click Dante Controller's [Device Info] tab and wait ±15 seconds.
The ENC 1202's IP address is displayed in Dante Controller's list.
5. Assign a static IP address of the ENC 1202's subnet to the connected computer.
The ENC 1202 is once again reachable.
ENC 1202
Version 1.0
Page 12
Advertisement
Table of Contents
Need help?
Do you have a question about the ENCHORUS ENC 1202 and is the answer not in the manual?
Questions and answers