C-Data FD1204S Configuration Manual
  1. Manuals
  2. Brands
  3. C-Data Manuals
  4. Network Hardware
  5. FD1204S
  6. Configuration manual

C-Data FD1204S Configuration Manual

Epon olt products
Hide thumbs
Table of Contents

Advertisement

Quick Links

EPON OLT Products User Manual
FD1204S/FD1208S/FD1216S/FD8000-L116
---Configration Guide
Version：V1.2
Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com

Advertisement

Table of Contents
loading

Related Manuals for C-Data FD1204S

Summary of Contents for C-Data FD1204S

  • Page 1 EPON OLT Products User Manual FD1204S/FD1208S/FD1216S/FD8000-L116 ---Configration Guide Version：V1.2 Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055) Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055) Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 Website: www.cdatatec.com...

  • Page 2: About This Manual

    © Statement Copyright © 2017 Shenzhen C-Data Technology Co., Ltd. All Rights Reserved. No part of this manual may be reproduced or transmitted in any form or by any means without the prior written consent. The information in this document may be update at any time due to product versions upgrade or any other reasons.

  • Page 3: Table Of Contents

    Content 1 Instruction ..........................1 Document Scope ....................... 1 Revision History ......................... 1 Proper Noun ........................1 Note ........................... 2 2 OLT Login Manage ........................2 2.1 OLT Login Manage Explanation ................... 2 2.2 OLT Login By Console....................2 2.3 OLT Login By Telnet...................... 3 3 OLT Upgrade ...........................
  • Page 4 6.5 Add ONU Manually....................30 6.6 Check ONU Registration Status ................. 31 6.7 Configure Bridge ONU（SFU）Service ..............31 6.7.1 Configure Bridge ONU(SFU) Internet Service ..........31 6.7.2 Configure Bridge ONU(SFU) IPTV Service ............32 6.8 Gateway ONU（HGU）Service Configure Introduction ........... 33 7 Configure OLT QinQ Service ....................

  • Page 5: Instruction

    1 Instruction Document Scope Products Software Reading Object Product Version C-DATA Employees, FTTX Operation&Maintenanc Cdata EPON OLT（FD1204S/FD1208S V1.3.X e Engineer, /FD1216S/FD8000-L116） C-DATA Customer’s Technical Engineer C-Data Product Management Center Document Compiling Department V1.2 Technical Support Department Version Revision History Date...

  • Page 6: Note

     Input incomplete commands can be completed by pressing the “Tab” key.  FD1204S、 FD1208S、 FD1216S are Pizza-Box OLT， only have one card， so,if we want to enter PON mode,need input interface epon 0/0  FD8000-L116 is Plug-in card OLT,has four PON card,so the comamnd for entering PON mode is OLT(config)# interface epon 0/<SlotID>...

  • Page 7: Olt Login By Telnet

     parameter for console login software Baud Rate:9600 Parity Check:None Databit:8 Stopbit:1 Flow Control:None Login OLT by console login software,then input username:root,password:admin [OLT console connection diagram] [OLT console connection device] Port on Computer Required Cable Port on OLT Serial Port RJ-45 to DB-9 Console Cable ...

  • Page 8: Olt Upgrade

    OLT default manage IP (default IP : 192.168.1.100). then input username and password,default login username is root,password is admin. Use command as follow can modify the outband management IP: OLT> enable OLT# config OLT(config)# interface mgmt OLT(config-interface-mgmt)# ip address 192.168.5.100 24 OLT(config-interface-mgmt)# exit 2.
  • Page 9 2.Test network connectivity a.Connnect PC to OLT console port,used for updating OLT in boot mode. b.Connect pc to OLT MGMT port or ge port,configure PC ip and OLT ip(inband ip or outband ip) are in same segment. c.PC can ping OLT manegemnet IP,if pc can ping OLT manegemnet ip,means OLT can connect to FTP server.

  • Page 10: Olt Web Management

    4.OLT update command FD1216S、FD1208S、FD1204S、FD8000-L116 OLT need update two file,one is FW file,another is Kernel file;if the boot file is too old,we need update boot file in OLT boot mode,boot upgrade way will be provided separately.OLT the common upgrade method please see below: a.Enter config view,input command as follows to update OLT kernel file(file name include...

  • Page 11: Configure Service In Olt Discrete Mode（Non-Template

    5 Configure Service In OLT Discrete Mode（Non-Template） This section mainly introduct FD1204S、FD1208S、FD1216S、FD8000-L116 internet service, voice service and multicast service in discrete mode in FTTH environment.Mainly introduce the bridge ONU(SFU and Home Gateway ONU (HGU),The following will introduce the service configuration way for OLT and ONU according to two types ONU.

  • Page 12: Data Plan

    5.2 Data Plan Main Data Plan List Configuration Item Data VLAN 100：Internet Service VLAN Data VLAN 200：IPTV Service VLAN 300：VOIP Service Ge5：VLAN 100 access mode Ge6：VLAN 200 access mode OLT Port Setting Ge7：VLAN 300 access mode PON1：VLAN 100, VLAN 200, VLAN 300 trunk mode Bridge ONU ID：1 ONU Register ID Gateway ONU ID：2...

  • Page 13: Configure Olt Service

    Start Create OLT Global Vlan Create OLT GE Port Vlan Create OLT PON port vlan Create ONU Port Vlan Save OLT Configration 5.4 Configure OLT Service 5.4.1 Configure OLT Global Vlan In config mode,we can use OLT(config)# show vlan all to show the created vlan. If the created vlan can’t meet the need,we can use command OLT(config)# vlan vlan-list to create new vlan,According to the data plan, we create vlan100,vlan200,vlan300 firstly: OLT(config)# vlan 100...
  • Page 14 OLT(config)# interface ge 0/0 OLT(config-interface-ge-0/0)# vlan mode 5-7 trunk OLT(config-interface-ge-0/0)# vlan trunk 5 100 OLT(config-interface-ge-0/0)# vlan trunk 6 200 OLT(config-interface-ge-0/0)#vlan trunk 7 300 OLT(config-interface-ge-0/0)# exit Configure GE 5、6、7 口 vlan mode is hybrid： OLT(config)# interface ge 0/0 OLT(config-interface-ge-0/0)# vlan mode 5-7 hybrid OLT(config-interface-ge-0/0)# vlan hybrid 5 tagged 100 OLT(config-interface-ge-0/0)# vlan hybrid 6 tagged 200 OLT(config-interface-ge-0/0)# vlan hybrid 7 tagged 300...

  • Page 15: Configure Olt Pon Port Service Vlan

    untag Discard If the VLAN in the message is permit to pass port, it will be forwarded directly; If the VLAN vlan tag in the message doesn’t permit to pass port, it is discarded. Add default vlan(native-vlan) for untagged untag message and forward.

  • Page 16: Configure Olt Multicast Service

    5.4.4 Configure OLT Multicast Service Configure IGMP and multicast-vlan 200 OLT(config)# igmp mode snooping OLT(config)# multicast-vlan 200 OLT(config-multicast-vlan-200)# igmp program add program-index 1 ip 224.3.3.3 OLT(config-multicast-vlan-200)# igmp router-port ge 0/0/6 OLT(config-multicast-vlan-200)# btv OLT(config-btv)# igmp user add user-index 1 pon 0/0/2 ont 2 vlan 1000 no-auth OLT(config-btv)# multicast-vlan 200 OLT(config-multicast-vlan-200)# igmp member user-index 1 OLT(config-multicast-vlan-200)# exit...

  • Page 17: Configure Bridge Onu(Sfu) Multicast Service

     OLT have created vlan for internet service  OLT have configured GE port vlan  OLT have configured PON port vlan  ONU have registered SFU ethernet port vlan mode have transparent,tag(access),trunk mode and so on,we can according to our network plan configure different mode.all onu vlan is configured by OLT,configure way as follows: Configure ONU1 eth1 vlan mode is tag(access) (ONU eth port vlan mode is tag in this document): OLT(config)# interface epon 0/0...

  • Page 18: Configure Gateway Onu（Hgu）Service

    5.7 Configure Gateway ONU（HGU）Service Gateway ONU（HGU）can provide internet,VOIP,IPTV service for FTTH,support PPPOE/DHCP dial-up,NAT，IGMP.Because HGU have route function, ONU service need to be configured with the local web or tr069,include wan and vlan configuration,don’t need configure vlan in olt,only make sure ONU can register to OLT.OLT don’t support configure ONU route wan,specific configure as follows: 5.7.1 Configure Gateway ONU（HGU）Internet Service--RTK Solution premise condition...

  • Page 19: Configure Gateway Onu（Hgu）Multicast Service--Rtk Solution

    Mode select Route. Check Enable VLAN and Vlan ID input 100. Service Mode select INTERNET. Bind port check Port_1 and wireless(SSID). Internet service take DHCP mode as an example in this document. The service type please select suitable type according to the user's actual environment. ONT detail usage please refer to ONT user manual.

  • Page 20: Configure Gateway Onu（Hgu）Internet Service--Broadcom Solution

    Mode select to Bridge. Check Enable Vlan,Vlan ID input 200. Service Mode select Other.Bind port click Port_2. 2. Config IGMP mode in ONU web Click Application IGMP Config IGMP Snooping. Enable IGMP Snooping. 3.Configure multicast vlan on ONU web Click Application Multicast Vlan 3_Other_B_VID_200 Modify. Input 200 behind VLAN multicast(blank said set).
  • Page 21 1. Create IPoE WAN in onu web Click Advanced SetupWAN Add Click Next Click Next NOTE： WAN service type select IP over Ethernet(IPoE). Service Description select to INTERNET. 802.1Q VLAN ID[0-4094] input 100. In this document,Internet service take DHCP mode as an example.please selected suitable service Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055) Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055) Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506...
  • Page 22 type according to the user's actual need. ONT detail use way please refer to ONT user manual. Click Next NOTE： If use DHCP access to internet,WAN IP Settings click Obtain an IP address automatically. If use static IP access to internet. Click Use the following Static IP address and input IP address, Subnet Mask and gateway IP address.
  • Page 23 Click Next Click Apply/Save 2. Check ONU route WAN status Click Device Info WAN Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055) Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055) Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 Website: www.cdatatec.com...

  • Page 24: Configure Gateway Onu（Hgu）Multicast Service--Broadcom Solution

    5.7.4 Configure Gateway ONU（HGU）Multicast Service--Broadcom Solution premise condition  OLT connect to uplink device and open multicast service  OLT have created vlan for multicast  OLT have configured GE port multicast vlan  OLT have configured PON port multicast vlan ...
  • Page 25 NOTE： WAN service type select Bridging. Check Allow as IGMP Multicast Source. Service Description select Other. 802.1Q VLAN ID[0-4094] input 200. Multicast VLAN[-1 or 0-4094] input 200. Click Apply/Save Click Advanced Setup Interface Grouping Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055) Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055) Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 Website: www.cdatatec.com...

  • Page 26: Configure Gateway Onu（Hgu）Voip Service--Broadcom Solution

    NOTE： Group Name free to enter. WAN Interface select to 3_Other_B_200/epon0.3. Move eth1.0 to Grouped LAN interface. The purpose of this step is isolate LAN2 from other LAN port，avoid multicast packet flood to other LAN port. If eth1.0(LAN2) move to Grouped LAN interface. LAN2 can only receive multicast traffic.
  • Page 27 Click Next NOTE： WAN service type select IP over Ethernet(IPoE). Service Description select VOICE. 802.1Q VLAN ID[0-4094] input 300. Click Next NOTE： Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055) Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055) Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 Website: www.cdatatec.com...
  • Page 28 If use DHCP access to internet,WAN IP Settings click Obtain an IP address automatically . If use static IP access to internet. Click Use the following Static IP address and input IP address, Subnet Mask and gateway IP address. Click Next Click Next Click Next Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
  • Page 29 Click Apply/Save Click Device Info WAN，check ONU wan information. 2. Configure Voice in ONU web Click Voice SIP Basic Setting NOTE： SIP Proxy, SIP Outbound Proxy, SIP Registrar input SIP server IP address. Extension, Display name, Authentication name, password is configured in SIP server,we input these information according Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055) Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055) Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506...

  • Page 30: Configure Service In Olt Profile Mode

    ----end 6 Configure Service In OLT Profile Mode This section is mainly introduct FD1204S、FD1208S、FD1216S、FD8000-L116 internet service, voice service and multicast service in profile mode in FTTH environment.we can configure different service profile based on different types of ONU, which can be handled flexibly.Mainly introduce the bridge ONU(SFU) and family gateway ONU (HGU),The following will introduce the service configure way for OLT and ONU according to two types ONU.

  • Page 31: Configure Process

    ： LAN 1 VLAN 100 Bridge ONU Port Config LAN 2： VLAN 200 LAN 3： VLAN 300 ---connect to VOIP phone LAN1： VLAN 100 ： Gateway ONT Port Config LAN2 VLAN 200 POTS1： VLAN 300 6.2 Configure Process Create ont srvprofile Start Create OLT globle vlan Register ONU,and bind...

  • Page 32: Configure Olt Pon Port Service Vlan

    Configure GE 5、6、7 port vlan mode is access(in this document,GE port connect to PC,so we configure ge port vlan mode as access): OLT(config)# interface ge 0/0 OLT(config-interface-ge-0/0)# vlan mode 5-7 access OLT(config-interface-ge-0/0)# vlan access 5 100 OLT(config-interface-ge-0/0)# vlan access 6 200 OLT(config-interface-ge-0/0)#vlan access 7 300 OLT(config-interface-ge-0/0)# exit Configure GE 5、6、7 port vlan mode is trunk：...

  • Page 33: Configure Olt Multicast Service

    Configure PON1 port vlan mode is hybird: OLT(config)# interface epon 0/0 OLT(config-interface-epon-0/0)# vlan mode 1 hybrid OLT(config-interface-epon-0/0)# vlan hybrid 1 tagged 100,200,300 OLT(config-interface-epon-0/0)# exit 6.3.4 Configure OLT Multicast Service Configure IGMP and multicast-vlan 200 OLT(config)# igmp mode snooping OLT(config)# multicast-vlan 200 OLT(config-multicast-vlan-200)# igmp program add program-index 1 ip 224.3.3.3 OLT(config-multicast-vlan-200)# igmp router-port ge 0/0/6 OLT(config-multicast-vlan-200)# btv...

  • Page 34: Create Onu Lineprofile

    OLT(dba-profile-1)# commit OLT(dba-profile-1)# exit NOTE： DBA based on the entire ONU schedule, we need to select the appropriate bandwidth type and bandwidth size according to the service type and onu users number. The summation of fixed bandwidth (fix) and guarantee bandwidth (assure) not surpass the total bandwidth of PON port. 6.4.2 Create ONU Lineprofile Create EPON ONU lineprofile,number is 1,bind to DBA profile 1: OLT(config)# ont-lineprofile epon profile-id 1...

  • Page 35: Check Onu Registration Status

    Add pon 1 onu 2 successfully. 4.Add all the ONU under PON port: ont confirm command can be used to add all the ONU under PON port, and also can add ONU separately.： OLT(config-interface-epon-0/0)# ont confirm 1 all mac-auth ont-lineprofile-id 1 ont-srvprofile-id 1 6.6 Check ONU Registration Status After adding ONU, use show ont info command to query the online status of ONU, and ensure that the ”Control flag”...

  • Page 36: Configure Bridge Onu(Sfu) Iptv Service

    configure vlan in srvprofile mode or discrete mode(note：If we configure onu port vlan in srvprofile and discrete mode,the discrete configuration priority is higher than the profile configuration,when ONU port discrete configuration vlan is transparent,will apply profile configuration),#4.5 show the discrete configuration, profile config is introduced as follows we can according to our network plan configure different vlan mode,configure way as follows: Configure ONU port vlan mode is tag(access) (ONU port vlan mode is tag in this document): OLT(config)# ont-srvprofile epon profile-id 1...

  • Page 37: Gateway Onu（Hgu）Service Configure Introduction

    OLT(config-epon-srvprofile-11)# port multicast-vlan eth 1 200 OLT(config-epon-srvprofile-11)# commit OLT(config-epon-srvprofile-11)# exit ----end 6.8 Gateway ONU（HGU）Service Configure Introduction Gateway ONU(HGU) can provide internet,voice,iptv service for FTTH,support PPPOE dial-up, network address translation (NAT), Internet Group Management Protocol (IGMP), due to the ONU heve route function, so we need configure onu wan and lan in onu web or TR069 server,not need configure ONU port in OLT, OLT don’t support configure ONU route wan, specific configure way can refer to the previous discrete configuration method and the ONU user manual.

  • Page 38: Configure Olt

    Start Create OLT global vlan Create Ge port vlan Configure PON port QinQ Create ONT vlan Save configuration 7.3 Configure OLT Create outer vlan： Oprate show vlan all command can query the existing vlan,If the existing vlan does not meet the need, we can use vlan command to create outer vlan.

  • Page 39: Concluding Remarks

    PON board mode) Concluding Remarks Thanks for using products of Shenzhen C-Data Technology Co. Ltd. Contact Information: Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
  • Page 40 Company Address: 6 floor, Building 4 of South Area 2, Honghualing Industrial Park, Xili Avenue, Nanshan District, Shenzhen, China Factory Address: 1 floor, Building B, Wentao Industrial Park, Yingrenshi Community, Shiyan Avenue, Baoan District, Shenzhen, China Telephone: 0755-26014509/26014710/26014711 Fax: 0755-26014506 Email: Marketing@cdatatec.com Website:...

This manual is also suitable for:

Fd1208sFd8000-l116Fd1216s

Table of Contents