Configure Gateway Onu（Hgu）Voip Service--Broadcom Solution - C-Data FD1204S Configuration Manual

NOTE：
Group Name free to enter. WAN Interface select to 3_Other_B_200/epon0.3. Move eth1.0 to
Grouped LAN interface. The purpose of this step is isolate LAN2 from other LAN port，avoid
multicast packet flood to other LAN port. If eth1.0(LAN2) move to Grouped LAN interface. LAN2
can only receive multicast traffic. Internet is not work on LAN2. This step is not necessary but
recommended.
Click Advanced Setup Interface Grouping to check interface grouping information.
5.7.5 Configure Gateway ONU（HGU）VOIP Service--Broadcom Solution
premise condition

OLT connect to uplink device and open multicast service

OLT have created vlan for VOIP

OLT have configured GE port VOIP vlan

OLT have configured PON port VOIP vlan

ONU have registered
1. Configure IPoE WAN in ONU web
Click Advanced SetupWAN Add
Click Next
Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
22