Mode select Route. Check Enable VLAN and Vlan ID input 100. Service Mode select INTERNET.
Bind port check Port_1 and wireless(SSID).
Internet service take DHCP mode as an example in this document. The service type please select
suitable type according to the user's actual environment. ONT detail usage please refer to ONT user
manual.
2. Check ONU internet wan status
Click StatusInternet Info
5.7.2 Configure Gateway ONU(HGU)Multicast Service--RTK Solution
premise condition
OLT connect to uplink device and open multicast service
OLT have created vlan for multicast
OLT have configured GE port multicast vlan
OLT have configured PON port multicast vlan
ONU have registered
1. Create bridge wan and bind LAN2 in onu web
NOTE:
Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
Click InternetInternet Config WAN Config
15
Need help?
Do you have a question about the FD1204S and is the answer not in the manual?
Questions and answers