Configure Olt; Common Command Description - C-Data FD1204S Configuration Manual

Create OLT global vlan
Configure PON port QinQ

7.3 Configure OLT

Create outer vlan：
Oprate show vlan all command can query the existing vlan,If the existing vlan does not meet the
need, we can use vlan command to create outer vlan.
OLT(config)# vlan 400
Configure GE port QinQ outer vlan：
OLT(config)# interface ge 0/0
OLT(config-interface-ge-0/0)#vlan mode 8 hybrid
OLT(config-interface-ge-0/0)# vlan hybrid 8 tagged 400
OLT(config-interface-ge-0/0)# exit
Configure PON port QinQ outer vlan and PON port QinQ：
OLT(config)# interface epon 0/0
OLT(config-interface-epon-0/0)#vlan mode 2 hybrid
OLT(config-interface-epon-0/0)#vlan hybrid 2 tagged 400
OLT(config-interface-epon-0/0)# vlan qinq 2 cvlan-range 1000 2000 400
OLT(config-interface-epon-0/0)# exit

8 Common Command Description

Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
Start
Create Ge port vlan
Create ONT vlan
Save configuration
End
34