Related Manuals for C-Data FD1604S
Summary of Contents for C-Data FD1604S
- Page 1 GPON OLT Products User Manual FD1604S/FD1608S/FD1616S ---Device Install Guide Version：V3.0 Shenzhen C-Data Technology Co., Ltd. Marketing@cdatatec.com +86-755-26014509 www.cdatatec.com...
- Page 2 Please contact your suppliers to get the latest version of this document. About This Manual This manual is applicable to C-Data FD1604S, FD1608S, FD1616S GPO N OLT products device install guide, Is the user to quickly and easily ins tall GPON OLT equipment should read the information before guidelines.
-
Page 3: Table Of Contents
4 Default Configuration ......................11 4.1 Network Parameter Configuration ..................11 4.2 OLT Console Parameter Configuration ................... 11 4.3 Default Username and Password ................... 11 5 Appendix : OLT Specification ....................11 Concluding Remarks ........................12 Shenzhen C-Data Technology Co., Ltd. Marketing@cdatatec.com +86-755-26014509 www.cdatatec.com... -
Page 4: Instruction
FD1608GS, FD1608SN, and FD1616SN OLT can be installed according to the device installation instructions. Pre-Installation Preparation Appearance and Interface The FD1616GS is 1U high Pizza-Box, can be mounted into the standard 19” rack. Demission of machine frame: 440mm(L)*391mm(W)*44mm(H). As shown below picture: Shenzhen C-Data Technology Co., Ltd. Marketing@cdatatec.com +86-755-26014509 www.cdatatec.com... - Page 5 There are ONT register on OLT Green , Always Port port(n) and the optical fiber link Indicator is normal. NO ONT link with the OLT port(n) Uplink Port GE n Flash There is the communication Shenzhen C-Data Technology Co., Ltd. Marketing@cdatatec.com +86-755-26014509 www.cdatatec.com...
-
Page 6: Power Requirement
When use AC power supply, the input voltage is 110/220VAC, the allowed range is 90 ~ 264VAC. Note: Follow all security specification and the rule about the electricity in the locality or the building. All power supply must be legal. Equipment Ground Shenzhen C-Data Technology Co., Ltd. Marketing@cdatatec.com +86-755-26014509 www.cdatatec.com... -
Page 7: Place Design Requirements
4 If want to install OLT inside the rack, ensure that have the necessary mounting screws and nuts and necessary tools. 5 Check the required cable and connectors for installation 6 In the system management, need connect the following equipment with OLT: Shenzhen C-Data Technology Co., Ltd. Marketing@cdatatec.com +86-755-26014509 www.cdatatec.com... -
Page 8: Olt Installation
OLT device to the tray or sideway of the cabinet and then push it to the cabinet. Step IV. Use screws to fix the suspension loops of the cabinet to the square holes of the Shenzhen C-Data Technology Co., Ltd. Marketing@cdatatec.com +86-755-26014509... -
Page 9: Port And Connection
Decide the port type of OLT according to the port type of the uplink device (Switch or Route) 3.4.1.3 Method of Making Cable If you use SFP optical module, cable specification: the optical cable with LC connector at Shenzhen C-Data Technology Co., Ltd. Marketing@cdatatec.com +86-755-26014509 www.cdatatec.com... -
Page 10: Pon Port Connection
3.4.4 Management Port Connection This OLT equipment provides console interface (marked as “CONSOLE” RJ45 type port) and MGMT management internet access (marked as “MGMT” RJ45 type port). Shenzhen C-Data Technology Co., Ltd. Marketing@cdatatec.com +86-755-26014509 www.cdatatec.com... - Page 11 When starting the management, please use straight and cross Ethernet cable, connecting “Console” management interface to network or managed PC. MGMT access requires: RJ45 cable Terminal emulation software: HyperTerminal Shenzhen C-Data Technology Co., Ltd. Marketing@cdatatec.com +86-755-26014509 www.cdatatec.com...
-
Page 12: Power Supply
Locate the four wires coming from the DC power source that will be used in the connection to your unit:: -48V: negative terminal -48V : Return (positive terminal) -48V: Earth ground Strip 5/16 inches(8mm) of insulation from each of the wires coming from the DC Shenzhen C-Data Technology Co., Ltd. Marketing@cdatatec.com +86-755-26014509 www.cdatatec.com... -
Page 13: Olt Working Status Checkout
Check the power LED. The power LED will be on. The SYS LED will flash per second If the uplink equipment is connected to the uplink port, the relevant connection LED is 3.5.3 Network Management Checkout Shenzhen C-Data Technology Co., Ltd. Marketing@cdatatec.com +86-755-26014509 www.cdatatec.com... -
Page 14: Default Configuration
Uplink Port 4 SFP interfaces 10-Gigabit 2 SFP+ interfaces Quantity Physical interface SFP slot PON Port Interface type ITU-TG.984.2 Class B+/Class C+ Max splitting ratio 1:128 Management port 1 100/1000BASE-Tx out-band Ethernet port Shenzhen C-Data Technology Co., Ltd. Marketing@cdatatec.com +86-755-26014509 www.cdatatec.com... -
Page 15: Concluding Remarks
-40～85℃ environment Relative humidity 5～90% (Non-condensing) Concluding Remarks Thanks for using products of Shenzhen C-Data Technology Co. Ltd. Contact Information: Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community， Xili Street, Nanshan District, Shenzhen, China Factory Address: 1...
Need help?
Do you have a question about the FD1604S and is the answer not in the manual?
Questions and answers