Configure Process; Configure Olt Service; Configfure Olt Globle Vlan; Configure Olt Ge Port Service Vlan - C-Data FD1204S Configuration Manual

Bridge ONU Port Config
Gateway ONT Port Config

6.2 Configure Process

Create OLT globle vlan
Configure OLT GE port vlan
Configure OLT PON port vlan
Create DBA profile
Create ont lineprofile

6.3 Configure OLT Service

6.3.1 Configfure OLT Globle Vlan

In config mode,we can use OLT(config)# show vlan all to show the created vlan.
If the created vlan can't meet the need,we can use command OLT(config)# vlan vlan-list to create
new vlan,According to the data plan, we create vlan100,vlan200,vlan300 firstly:
OLT(config)# vlan 100
OLT(config)# vlan 200
OLT(config)# vlan 300

6.3.2 Configure OLT GE Port Service Vlan

We can config GE port vlan mode as access,hybrid and trunk,according to our network plan
configure different mode, configure way of three mode as follows.
Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
：
LAN 1 VLAN 100
LAN 2： VLAN 200
LAN 3： VLAN 300
LAN1： VLAN 100
：
LAN2 VLAN 200
POTS1： VLAN 300
Start
---connect to VOIP phone
Create ont srvprofile
Register ONU,and bind
lineprofile and srvprofile
Save OLT configuration
End
27