Table of Contents
Advertisement
Grounding the System
Grounding the System
Installing the Cisco UCS 6296 Chassis in a Cabinet or Rack
This section describes how to use the rack-mount kit provided with the chassis to install Cisco UCS 6296 into
a cabinet or rack that meets the requirements. All Cisco UCS 6200 Series Fabric Interconnects use the same
installation procedure.
Caution
If the rack is on wheels, ensure that the brakes are engaged or that the rack is otherwise stabilized.
This table lists the items contained in the rack-mount kit provided with the chassis.
Table 12: Cisco UCS 6296 Rack-Mount Kit
Quantity
2
12
2
10
10
2
Procedure
Step 1
Install the front rack-mount brackets as follows:
a) Position a front rack-mount bracket against the chassis and align the screw holes as shown below. Then
attach the front rack-mount bracket to the chassis with four M4 screws.
b) Repeat with the other front rack-mount bracket on the other side of the chassis.
Figure 19: Attaching Front Rack-Mount Bracket to a Cisco UCS 6296
Cisco UCS 6200 Series Fabric Interconnect Hardware Installation Guide
28
Installing the Cisco UCS 6200 Series Fabric Interconnect
Part Description
Rack-mount brackets
M4x0.7 x 8-mm Phillips countersink screws
Rack-mount guides
10-32 rack nuts
10-32 x 3/4-inch Phillips pan-head screws
Slider rails
1
2
3
OL-24475-03
Hide quick links:
Advertisement
Table of Contents
