Cisco UCS 6248 UP Installation Manual page 20

Power Supplies
Figure 14: Power Supply for the Cisco UCS 6296 UP Switch
1
2
Table 3: Power Supply LED Descriptions
Power Supply Condition
No AC power to all power supplies.
Power supply failure, including
over voltage, over current, over
temperature, and fan failure.
Power supply warning events
where the power supply continues
to operate. These events include
high temperature, high power, and
slow fan.
AC present, 3.3 voltage standby
(VSB) on, and the power supply
unit is off.
Power supply on and OK.
If one power supply is installed in the chassis, but the other power supply slot is empty, a blank filler panel
(N10-S1BLKP=) should be used to cover the empty slot.
Cisco UCS 6200 Series Fabric Interconnect Hardware Installation Guide
10
Failure (top) and Power
3
(bottom) LEDs
Handle
Power LED Status
Off
Off
Off
1 Hz blinking
On
Product Overview
Release lever
Fail LED Status
Off
On
1 Hz Blinking
Off
Off
OL-24475-03