Soldering The Ic Socket; Inserting The Ic Socket Connector - Renesas H8SX/1648 User Manual

2.1.2

Soldering the IC Socket

After fastening, solder the IC socket for a PLQP0144KA-A package to the user system.
Be sure to completely solder the leads so that the solder
gently covers the leads and forms solder fillets. (Use
slightly more solder than with the MCU.)
2.1.3

Inserting the IC Socket Connector

Check the location of pin 1 before inserting.
After checking the location of pin 1 on the user system interface board and pin 1 on the IC socket
connector, align the guide pins on the IC socket connector with the guide holes on the user system
interface board, and insert the IC socket connector into the IC socket (figure 3).
CAUTION
CAUTION
5