Renesas H8S/2615 Series User Manual page 20

Fasten the user system interface cable head to the IC socket for an FP-80Q package on the user
system with the four screws (M2
tightened a little at a time, alternating between screws on opposing corners. Take special care, such
as manually securing the IC socket soldered area, to prevent the soldered IC socket from being
damaged by overtightening the screws or twisting the components.
Figure 3 Connecting User System Interface Cable to User System
12 mm; with four flat washers) provided. Each screw should be
x
IC socket
(IC149-080-017-B5
manufactured by
YAMAICHI ELECTRONICS Co., Ltd.)
User system
Screws (M2 x 12 mm)
with flat washers
Cable head
Pin 1
7