Connecting User System Interface Cable To User System; Installing Ic Socket; Inserting Cable Head - Renesas DP-64S User Manual

2.2

Connecting User System Interface Cable to User System

Always switch OFF the user system and the emulator
product before the USER SYSTEM INTERFACE CABLE
is connected to or removed from any part. Before
connecting, make sure that pin 1 on both sides are correctly
aligned. Failure to do so will result in a FIRE HAZARD and
will damage the user system and the emulator product or
will result in PERSONAL INJURY. The USER PROGRAM will
be LOST.
To connect the cable head to the user system, follow the instructions below.
2.2.1

Installing IC Socket

Prepare an IC socket (commercially available) for the DP-64S package and mount it on the user
system.
Recommended IC socket:
2.2.2

Inserting Cable Head

Check the location of pin 1 before inserting.
Align pin 1 on the IC socket for a DP-64S package on the user system with pin 1 on the user
system interface cable head, and insert the user system interface cable head into the IC socket on
the user system, as shown in figure 3.
WARNING
IC83-64075-GS4
manufactured by YAMAICHI ELECTRONICS Co., Ltd.
CAUTION
5